Airbrush

This Is Badger's Propel Regulator. Features: * Made of high-impact nylon, with metal parts. * Regulates on/off for Propel. * Adjusts propel can pressure from 10 to 50 PSI. * Pressure control allows finer spray pattern adjustment. * Prolongs life of Propel up to 50%. * Instructions provided on package.
...more about the Badger Airbrush Co. Propel Regulator

This is a Drainable Moisture Trap from Badger. Features: For use with Badger braided or transparent air hose and compressor.
...more about the Badger Airbrush Co. In-Line Moisture Filter

This is an In-Jar Paint Filter from Badger. Features: * For use with siphon tube 50-025 (BADR1317). * Traps impurities in paint. * Fine metal screen filter.
...more about the Badger Airbrush Co. In Jar Paint Filter

15 Oz. Propellant Can for Spray. Features: * Propellant can attaches to vinyl air hose and air brush spray gun for premium spray paint quality. * 15 ounces of liquid propellant for quality spray painting. * Specific assembly and operation directions on propellant can. * Propellant vapors are not harmful to the ozone or environment.
...more about the Badger Airbrush Co. Propel 13 oz

This Is A 12 Ounce Bottle of Aluminum Oxide Abrasive by Badger. Features: * Specially ground to a 220 grit. * When used with the Model 260 Hobby Abrasive Gun, it creates an endless variety of effects in glass etching, or cuts monograms in. * wood or metal. Prep wood, metal and plastic surfaces and curves,. * hard to reach areas for refinishers. Realistic weathering effects. * can also be achieved. * Aluminum Oxide tends to breakdown quicker in size and is less abrasive to the surface. * Aluminum Oxide develops a "Working Mix" of grit sizes which optimizes the number of abrasive impacts on a surface--this translates to a. * much faster cleaning rate. * For coarse grinding.
...more about the Badger Airbrush Co. Aluminum Oxide Abrasive 12 oz

This is a 4 Oz. Glass Paint Jar with Cover from Badger. Features: * Clear glass jar with black plastic lid. * Fits Models 250-4 and 260.
...more about the Badger Airbrush Co. Paint Jar 4 oz

This Is Badger's Plastic (not Metal) Jar Adaptor. Features: * 60 degree angle configuration for proper alignment with Model 350 airbrush. * Fits all three size jars. * With gasket and siphon tube. * Instructions provided on package.
...more about the Badger Airbrush Co. Fast Blast Jar Adapter 350

This is a 3 Oz. (90cc) Plastic Jar with Adaptor from Badger. Features: * Adaptor angles 60 degrees for proper Model 350 airbrush balance. * Transparent white plastic jar.
...more about the Badger Airbrush Co. Plastic Jar w/350 Adapter 3 oz

This is a Siphon Tube for Badger's New Jar Adaptors. Features: * For 50-208 (BADR1171) and 50-308 (BADR1176) jar adaptors. * Clear plastic tubing.
...more about the Badger Airbrush Co. Siphon Tube New Jar Adapter

This is a 1 Oz. Siphon Tube for 20mm Adaptors from Badger. Features: * Works with 20mm Jar Adaptors for Air-Opaque and Air-Tex bottles. * Clear tubing.
...more about the Badger Airbrush Co. 51-005 Siphon Tube 1 oz

This is an Adapter for the 150, 155, 175, 200 or 360 Badger Series Airbrushes. This will enable the modeler to use jars which accept 20mm lids.
...more about the Badger Airbrush Co. Fast Blast Adapter 150/200 Siphon 4 oz

This is a Replacement Needle for Badger Model 155 & 360 Airbrushes. Features: * For Models 155 and 360. * Pencil line to 3" (76mm) spray pattern.
...more about the Badger Airbrush Co. Replacement Needle 155

This is a 28mm Floquil Jar Adaptor for Badger Airbrushes. Works for models 150, 155, 175, 200, and 360. Features: Black plastic jar adapter (lid) 2-3/4" siphon tube and gasket.
...more about the Badger Airbrush Co. 28mm Jar Adapter Floquil

This is a 28mm Floquil Jar Adaptor for Badger Airbrushes. Features: * Includes siphon tube and gasket. * For Model 350.
...more about the Badger Airbrush Co. 28mm Jar Adapter Floquil 350

This is a 9.5oz (270g) can of Hobbico Airbrush Propellant. Features: * Much lighter and more portable than using a compressor, no electricity required. * Propellant formula is ozone-safe Compatible with most airbrushes.
...more about the Hobbico Air Brush Propel 9.5 oz

This is the Deluxe Airbrush Station for use with the Hobbico Airbrush Systems. Features: Holds up to four airbrushes Top airbrush holder swivels to keep airbrush in desired position Bracket for mounting pressure regulator Clamps to workbench or table.
...more about the Hobbico Deluxe Air Brush Station

This is the Mini Regulator with Filter for the Hobbico Airbrush System. Features: Compact design incorporates both the pressure regulator, filter and water trap into one convenient low-cost unit Easily serviced, no special tools required Convenient water drain on bottom of polycarbonate bowl Sturdy cast aluminum construction High quality filter element removes dirt, grime, pipe scale and most solid materials 2-160 PSI (14-1103kP) adjustable range, relieving type diaphragm, locking adjustment knob One year limited warranty.
...more about the Hobbico Mini Regulator w/Filter

This is the 5mm to 1/4" Hose Adapter from Model Maker. It allows hook-ups from a 5mm hose fitting to a 1/4" compressor output. Features: Metal construction Plated finish.
...more about the Hobbico Hose Adapter 5mm To 1/4''

This is the 5mm to 1/8" Hose Adapter from Model Maker. It allows hook-ups from a 5mm hose fitting to a 1/8" compressor output. Features: Metal construction Plated finish Knurled for better grip.
...more about the Hobbico Hose Adapter 5mm To 1/8''

This is the 1/8" to 5mm" adapter from Model Maker. It changes an 5mm output to a 1/8" output. Features: Metal construction Internal 5mm threads External 1/8" threads.
...more about the Hobbico Adapter 1/8'' To 5mm

This is the 1/8" to 1/8" Hose Adapter from Model Maker. Features: Brass construction External threads, both sides Required when using the Mini Regulator (HCAR4027) with the Double Action Paint Gun (HCAR4016).
...more about the Hobbico Adapter 1/8'' To 1/8''

This is the 1/8" to 1/4" adapter from Model Maker. It changes an 1/8" compressor output to a 1/4" output. Features: Metal construction Internal 1/8" threads External 1/4" threads.
...more about the Hobbico Adapter 1/8'' To 1/4''

This is the six foot Vinyl Hose with 5mm end-fittings from Model Maker. Features: Vinyl Construction Threaded, metal end-fittings.
...more about the Hobbico Vinyl Hose 5mmx6'

This is the Large Vinyl Hose from Model Maker. It features 1/8" fittings. Features: Vinyl Hose Construction 1/8" Fittings on both ends.
...more about the Hobbico Vinyl Hose Large 1/8''x8.5'

This is a 6 foot, 1/8 x 1/8 braided Hose from Model Maker. It supplies air from the air compressor to the airbrush. Features: Durable, braided outer skin 1/8 female threaded fittings, both ends.
...more about the Hobbico Braided Hose 1/8''x1/8''x6'

This is a 6 foot, 1/8" x 5mm braided Hose from Model Maker. It supplies air from the air compressor to the airbrush. Features: Durable, braided outer skin 1/8" female threaded fittings, both ends.
...more about the Hobbico Braided Hose 1/8''x5mmx6'

This is the Propellant Can Regulator for use with the Model Maker Propellant. Features: Plastic construction with metal fittings For use with 5mm hose fittings.
...more about the Hobbico Propel Can Regulator

This is the 3/4oz (22cc) Glass Jar with Lid for the Hobbico Airbrush Systems. Features: Attaches to airbrush and holds paint.
...more about the Hobbico Glass Jar w/Lid 3/4oz (22cc)