Airbrush

This is a 3 Oz. Plain Cover from Paasche. Features: * Fits Paasche 3 oz. jars. * White metal screw-on lid.
...more about the Paasche Airbrush Comp. Plain Cover w/o Gasket 3 oz

This is a 1 Oz. Plain Cover from Paasche. Features: * Fits Paasche 1 oz. jars. * White metal screw-on lid.
...more about the Paasche Airbrush Comp. Plain Cover w/o Gasket 1 oz

Store paint between uses. Quickly replace the cap with the siphon-tube cap and connect to airbrush for rapid color changes.
...more about the Paasche Airbrush Comp. Jar w/Cover & Gasket 3 oz

Store paint between uses. Quickly replace the cap with the siphon-tube cap and connect to airbrush for rapid color changes.
...more about the Paasche Airbrush Comp. Jar w/Cover & Gasket 1 oz

Glass jar with cap and siphon tube for Paasche "H" airbrushes.
...more about the Paasche Airbrush Comp. oz Color Bottle Assembly 3 oz

This is a 1 Oz. Glass Bottle from Paasche. Features: Clear glass bottle.
...more about the Paasche Airbrush Comp. Bottle Only H&V 1 oz

This is an HC-1 Aircap from Paasche. Features: * For Paasche H and HS Series airbrushes. * 1/32" to 1" spray pattern of light fluid.
...more about the Paasche Airbrush Comp. Aircap

This is an HC-3 Aircap from Paasche. Features: * For Paasche H and HS Series airbrushes. * 1/32" to 1-1/4" spray pattern of medium fluid.
...more about the Paasche Airbrush Comp. Aircap

This is an HN-1 Needle from Paasche. Features: * For Paasche H and HS Series airbrushes. * 1/32" to 1" spray pattern of light fluid.
...more about the Paasche Airbrush Comp. Needle

This is an HN-3 Needle from Paasche Airbrushes. Features: * For Paasche H and HS series airbrushes. * Spray pattern 1/32" to 1-1/4". * For medium fluids.
...more about the Paasche Airbrush Comp. Needle Size #3

This is the replacement needle for Paasche airbrush #PASR2130(H-single action). Features: * This is the number #5 needle. * It is used for heavier type materials such as lacquers, enamels and strained/thinned acrylics.
...more about the Paasche Airbrush Comp. Needle Size #5

This is an HT-1 Tip from Paasche Airbrushes. Features: * For Paasche H and HS series airbrushes. * Spray pattern 1/32" to 1". * For light fluids.
...more about the Paasche Airbrush Comp. Tip

This is an HT-3 Tip from Paasche Airbrushes. Features: * For Paasche H and HS series airbrushes. * Spray pattern 1/32" to 1-1/4". * For medium fluids.
...more about the Paasche Airbrush Comp. Tip

This is an HT-5 Nickel Silver Tip from Paasche. Features: * For Paasche H and HS Series airbrushes. * 1/16" to 1-1/2" spray pattern of medium fluid.
...more about the Paasche Airbrush Comp. Tip

Inline water trap to remove moisture from the air line. Prevents damage to airbrush and moisture affecting the spray pattern.
...more about the Paasche Airbrush Comp. Moisture Trap

In-line low pressure regulator with a 60 p.s.i. gauge and moisture drain. This regulator gives user control of operating pressure as well as assisting in furnishing clean, dry and regulated air. Features: * Five (5) micron filtration. * 15 SCFM @ 50 PSI. * Regulators must only be used as instructions and warnings specify.
...more about the Paasche Airbrush Comp. R-75AR Air Regulator w/Filter & Gauge

This is an TA-2 .38mm Aircap from Paasche. Features: For Paasche Talon Airbrush Aluminum construction.
...more about the Paasche Airbrush Comp. Aircap 38mm

This is the TAL-19 Needle Locknut from Paasche. Features: Aluminum construction Silver in color.
...more about the Paasche Airbrush Comp. Needle Locknut

This is the Needle Stop for the Talon Dual Action Airbrush from Paasche. Features: Aluminum construction with rubber O-ring Replaces worn or leaking needle stops.
...more about the Paasche Airbrush Comp. Needle Stop

This is the TAL-37 Trigger Assembly for the Paasche Talon Dual Action Airbrush (PASR2602). Features: Aluminum construction Silver in color.
...more about the Paasche Airbrush Comp. Trigger Assembly

This is the Packing Assembly for use on the Talon Airbrushes from Paasche. Features: Brass and nylon construction.
...more about the Paasche Airbrush Comp. Packing Assembly

This is the TG-4 Cup Cover for use on the Paasche Talon Dual Action Airbrush (PASR2602). Features: Aluminum construction Gold in color.
...more about the Paasche Airbrush Comp. Cup Cover

This is the TN-2 .38mm Needle for use with the Paasche Talon Airbrush (PASR2602). Features: Aluminum construction.
...more about the Paasche Airbrush Comp. Needle 38mm