Badger Airbrush

Holds two airbrushes of any make or model. The 125 allows easy access. to your air brushes; eliminates dropping of airbrush and paint spills. The unit clamps securely to any drafting table, desk or taboret edge (up to 2” 5cm thick). .
...more about the Badger Airbrush Co. Dual Airbrush Holder

10' of Braided Air Hose by Badger. Features: * Used to connect badger airbrush to air compressor. * Durable rubber air hose in braided fabric housing. * Swivel connection for airbrush at one end and varying air source connector fitting at opposite end.
...more about the Badger Airbrush Co. Braided Air Hose 10'

This is a Medium Head & Tip for Badger Airbrushes. Features: For Models 100, 150 and 200.
...more about the Badger Airbrush Co. Medium Head + Tip

This is a 1/4 Oz. Color Cup for Badger Airbrushes. Features: * For Models 150, 155, 175 and 200. * Metal construction.
...more about the Badger Airbrush Co. 1/4 Color Cup 150/200

This is a Fine Needle for Badger Airbrushes. Features: * For Models 100 and 150. * Pencil line to 2" (51mm) spray pattern.
...more about the Badger Airbrush Co. Fine Needle 150/100

This is a 2 Oz. Glass Paint Jar with Cover from Badger. Features: * Clear glass jar with black plastic lid. * Fits Models 150, 155, 175, 200, 250, 350 and 360.
...more about the Badger Airbrush Co. Jar & Cover 2 oz

This Is Badger's Plastic Jar Adaptor. Note that the picture may show a metal base, but the base is now made of plastic. Features: * 30 degree angle configuration for proper alignment with Model 150, 155, 175, 200 & 360 airbrushes. * Fits all three size jars. * With gasket and siphon tube. * Instructions provided on package.
...more about the Badger Airbrush Co. Fast Blast Jar Adapter 150 200

This is a 3/4 Oz. Glass Paint Jar with Cover from Badger. Features: * Clear glass jar with black plastic lid. * Fits Models 150, 155, 175, 200, 250, 350 and 360.
...more about the Badger Airbrush Co. Jar & Cover 3/4 oz

This is the Fine Tip for the Badger Crescendo Airbrush Sets - BADR1016 and BADR1019. Features: Aluminum construction, silver in color.
...more about the Badger Airbrush Co. Fine Tip Crescendo

This is a Medium Tip for Badger Airbrushes. Features: For Models 155, 360 and Crescendo.
...more about the Badger Airbrush Co. Medium Tip Crescendo/Anthem

This is the Large Tip for the Badger Crescendo Airbrush Sets - BADR1016 and BADR1019. Features: Aluminum construction, silver in color.
...more about the Badger Airbrush Co. Large Tip Crescendo

This is the Fine Needle for the Badger Crescendo Airbrush Sets - BADR1016 and BADR1019. Features: Aluminum construction, silver in color.
...more about the Badger Airbrush Co. Fine Needle Crescendo

This is the Medium Needle for the Badger Crescendo Airbrush Sets - BADR1016 and BADR1019. Features: Aluminum construction, silver in color.
...more about the Badger Airbrush Co. Medium Needle Crescendo

This is the Fine Regulator for the Badger Crescendo Airbrush Sets - BADR1016 and BADR1019. Features: Aluminum and brass construction, silver in color.
...more about the Badger Airbrush Co. Fine Regulator Crescendo

This is the Medium Regulator for the Badger Crescendo Airbrush Sets - BADR1016 and BADR1019. Features: Aluminum and brass construction, silver in color.
...more about the Badger Airbrush Co. Medium Regulator Crescendo

This is 5' of Vinyl Air Hose from Badger. Features: * Used to connect airbrush to air source. * Flexible, lightweight vinyl hose. * Black with silver fittings on each end. * Not recommended for continuous use with a compressor.
...more about the Badger Airbrush Co. Vinyl Hose 5'

This is 8' of Vinyl Air Hose from Badger. Features: * Used to connect airbrush to air source. * Flexible, lightweight vinyl hose. * Black with Silver fittings on each end. * Not recommended for continuous use with a compressor.
...more about the Badger Airbrush Co. Vinyl Hose 8' (Includes 50-020)

This Is A 7 Ounce Can of Propel Propellant by Badger. Features: * Excellent starting air source or short usage alternative air source for use with all types and makes of air brushes. * Contains no CFC's. * Does not promote ozone depletion. * Liquid propellant for spray painting. * Propel is basically a "can of air" used for air brushing. * Directions are provided on how to attach air brush to pressure supply. * Certified by Art & Craft Materials Institute.
...more about the Badger Airbrush Co. Propel 7 oz

This is a Plunger & "O" Ring for Badger Airbrushes. Features: Direct replacement part for most Badger airbrushes.
...more about the Badger Airbrush Co. Plunger & O-Ring

This Is Badger's "O" Ring Airbrush Accessory. Features: For Models 100, 150, 175, 200.
...more about the Badger Airbrush Co. O-Ring 150/100/200

This is a Complete Fine Head Assembly for Badger Airbrushes. Features: For Models 100, 150 and 200.
...more about the Badger Airbrush Co. Complete Head Assembly Fine 150

This is a Complete Medium Head Assembly for Badger Airbrushes. Features: For Models 100, 150 and 200.
...more about the Badger Airbrush Co. Complete Head Assembly Medium 150

This is a Complete Large Head Assembly for Badger Airbrushes. Features: For Models 100, 150 and 200.
...more about the Badger Airbrush Co. Complete Head Assembly Large 150

This 200 Medium Needle Is A Badger Airbrush Accessory. Features: * For standard Model 200 airbrush. * Precision engineered tool for professionals and hobbyists. * Used to make spray patterns 1/32" to 2-1/2". * Comes in a clear plastic tube.
...more about the Badger Airbrush Co. Needle Medium 200

This 200 Large Needle Is A Badger Airbrush Accessory. Features: * For standard Model 200 airbrush. * Precision engineered tool for professionals and hobbyists. * Used to make thick spray patterns (1/16" to 3"). * Comes in a clear plastic tube.
...more about the Badger Airbrush Co. Needle Large 200

This 200 Fine Needle Is A Badger Airbrush Accessory. Features: * For standard Model 200 airbrush. * Precision engineered tool for professionals and hobbyists. * Used to make very fine pencil line spray patterns to 2". * Comes in a clear plastic tube.
...more about the Badger Airbrush Co. Needle Fine 200

This is a 1/4" Compressor Adaptor from Badger. Features: * Adapts air hose to compressor or CO2 tank. * Brass fitting.
...more about the Badger Airbrush Co. Compressor Adapter 1/4''

This is a 1/4" (6.4mm) Compressor Adaptor with Bleeder Hole from Badger. Features: * Adapts air hose to compressor or CO2 tank. * Brass fitting.
...more about the Badger Airbrush Co. 1/4'' Compressor Adapter w/Bleed

This is a Siphon Tube for Badger Airbrushes. Features: * For Model 260. * Clear plastic tubing.
...more about the Badger Airbrush Co. Siphon Tube