Hobbico Airbrush

This is the Fine Air Tip for the Hobbico Model Master SA Single Action Airbrushes HCAR4005, HCAR4007. Features: Sprays fine pattern Metal construction with rubber gasket.
...more about the Hobbico Air Tip Fine SA200/200P

This is the 22cc Color Cup for the Model Maker DA500 Paint Gun. It attaches to the gun via the Cup Adapter. It holds paint during use. Features: White/Clear plastic construction.
...more about the Hobbico Color Cup 22cc DA500

This is the Color Cup Cover for the Model Maker DA500 Paint Gun. It attaches to the Color Cup to keep paint from spilling. Features: White/Clear plastic construction Vented.
...more about the Hobbico Cup Cover DA500

This is a 9.5oz (270g) can of Hobbico Airbrush Propellant. Features: * Much lighter and more portable than using a compressor, no electricity required. * Propellant formula is ozone-safe Compatible with most airbrushes.
...more about the Hobbico Air Brush Propel 9.5 oz

This is the Deluxe Airbrush Station for use with the Hobbico Airbrush Systems. Features: Holds up to four airbrushes Top airbrush holder swivels to keep airbrush in desired position Bracket for mounting pressure regulator Clamps to workbench or table.
...more about the Hobbico Deluxe Air Brush Station

This is the Mini Regulator with Filter for the Hobbico Airbrush System. Features: Compact design incorporates both the pressure regulator, filter and water trap into one convenient low-cost unit Easily serviced, no special tools required Convenient water drain on bottom of polycarbonate bowl Sturdy cast aluminum construction High quality filter element removes dirt, grime, pipe scale and most solid materials 2-160 PSI (14-1103kP) adjustable range, relieving type diaphragm, locking adjustment knob One year limited warranty.
...more about the Hobbico Mini Regulator w/Filter

This is the 5mm to 1/4" Hose Adapter from Model Maker. It allows hook-ups from a 5mm hose fitting to a 1/4" compressor output. Features: Metal construction Plated finish.
...more about the Hobbico Hose Adapter 5mm To 1/4''

This is the 5mm to 1/8" Hose Adapter from Model Maker. It allows hook-ups from a 5mm hose fitting to a 1/8" compressor output. Features: Metal construction Plated finish Knurled for better grip.
...more about the Hobbico Hose Adapter 5mm To 1/8''

This is the 1/8" to 5mm" adapter from Model Maker. It changes an 5mm output to a 1/8" output. Features: Metal construction Internal 5mm threads External 1/8" threads.
...more about the Hobbico Adapter 1/8'' To 5mm

This is the 1/8" to 1/8" Hose Adapter from Model Maker. Features: Brass construction External threads, both sides Required when using the Mini Regulator (HCAR4027) with the Double Action Paint Gun (HCAR4016).
...more about the Hobbico Adapter 1/8'' To 1/8''

This is the 1/8" to 1/4" adapter from Model Maker. It changes an 1/8" compressor output to a 1/4" output. Features: Metal construction Internal 1/8" threads External 1/4" threads.
...more about the Hobbico Adapter 1/8'' To 1/4''

This is the six foot Vinyl Hose with 5mm end-fittings from Model Maker. Features: Vinyl Construction Threaded, metal end-fittings.
...more about the Hobbico Vinyl Hose 5mmx6'

This is the Large Vinyl Hose from Model Maker. It features 1/8" fittings. Features: Vinyl Hose Construction 1/8" Fittings on both ends.
...more about the Hobbico Vinyl Hose Large 1/8''x8.5'

This is a 6 foot, 1/8 x 1/8 braided Hose from Model Maker. It supplies air from the air compressor to the airbrush. Features: Durable, braided outer skin 1/8 female threaded fittings, both ends.
...more about the Hobbico Braided Hose 1/8''x1/8''x6'

This is a 6 foot, 1/8" x 5mm braided Hose from Model Maker. It supplies air from the air compressor to the airbrush. Features: Durable, braided outer skin 1/8" female threaded fittings, both ends.
...more about the Hobbico Braided Hose 1/8''x5mmx6'

This is the Propellant Can Regulator for use with the Model Maker Propellant. Features: Plastic construction with metal fittings For use with 5mm hose fittings.
...more about the Hobbico Propel Can Regulator

This is the 3/4oz (22cc) Glass Jar with Lid for the Hobbico Airbrush Systems. Features: Attaches to airbrush and holds paint.
...more about the Hobbico Glass Jar w/Lid 3/4oz (22cc)

This is the 2oz (50cc) Glass Jar with Lid for the Hobbico Airbrush Systems. Features: Attaches to airbrush and holds paint.
...more about the Hobbico Glass Jar w/Lid 2oz (50cc)

This is the Airbrush Cleaner for the Hobbico Airbrush Systems. Features: Ideal for cleaning all airbrush components Use full strength to soak nozzles and color cups overnight Dilute with 50% water to use as a flush cleaner between color changes.
...more about the Hobbico Airbrush Cleaner 3.4oz SA200/200P

This is the Air Tip Bushing for the SA200 & SA200P Model Maker Airbrushes. It is located at the front of the main airbrush body. Features: Aluminum Construction Press-in fit.
...more about the Hobbico Air Tip Bushing SA200/200P

This is the Plunger Assembly for the SA200 & SA200P Model Maker Airbrushes. It is an internal part that is operated via the trigger button. Features: Brass construction O-ring sealed.
...more about the Hobbico Plunger Assembly SA200/200P

This is the Jar Adapter for the SA200 & SA200P Model Maker Airbrushes. It provides a lid for the paint jar and acts as a paint pickup. Features: Plastic lid construction Screw-on type assembly Aluminum paint pick-up elbow.
...more about the Hobbico Jar Adapter SA200/200P

This is the Siphon Tube for the Jar Adapter (HCAR4157). It allow the paint to be siphoned out of the Paint Jar for delivery to the airbrush. Features: Semi-flexible plastic tubing Solvent safe Clear in color.
...more about the Hobbico Siphon Tube SA200/200P

This is the Paint Nozzle for the Hobbico Model Master Single Action Air Brush, HCAR4005, HCAR4007. Features: Installs on the underside of the air tip body and fits into the air tip at the end of the body.
...more about the Hobbico Paint Nozzle SA200/200P

This is the O-Ring for the Fluid Needle for the Hobbico Model Master Single Action Air Brush HCAR4005, HCAR4007. Features: Constructed of rubber.
...more about the Hobbico O-Ring SA200/200P

This is the O-Ring for the Regulator Valve for the Hobbico Model Master Single Action Air Brush HCAR4005, HCAR4007. Features: Constructed of rubber.
...more about the Hobbico O-Ring Regulator Valve

This is the Teflon Seal for the Model Maker DA400 and DA450 airbrushes. Features: Teflon construction.
...more about the Hobbico Teflon Seal DA400/450

This is the Wrench for the Model Maker DA400 and DA450 Airbrushes. Features: Steel construction Open-end style.
...more about the Hobbico Wrench DA400/450

This is the 0.7mm Nozzle for the Model Maker DA450 Airbrush. Fit between the Spray Nozzle Cap and the Spray Nozzle Assembly. Features: Metal construction.
...more about the Hobbico Nozzle 0.7mm DA450

This is the Air Tip Seal for the Model Maker DA500 Paint Gun. It attaches to the Air Tip Lock Nut (HCAR4306). Features: Metal construciton Knurled rear edge for easy assembly/disassembly.
...more about the Hobbico Air Tip Seal DA500