Hobbico Airbrush

Installs on underside of the air tip body and holds paint nozzle in place. One Fluid Needle for the Hobbico Model Master Single Action Air Brush part #23. This is the Fine Fluid Needle for the Hobbico Model Master Single Action Air Brush HCAR4005,
...more about the Hobbico Fluid Needle Fine SA200/200P

Rubber construction. One Lock Screw O-ring (key# 15). This is the Lock Screw O-ring for the Model Maker DA500 Paint Gun. It is located between the Lock Screw and the Paint Gun
...more about the Hobbico Lock Screw O-Ring DA500

Much lighter and more portable than using a compressor, no electricity required. Propellant formula is ozone-safe Compatible with most airbrushes. One 9.5oz (270g) can of Hobbico Airbrush Propellant. This is a 9.5oz (270g) can of Hobbico Airbrush
...more about the Hobbico Air Brush Propel 9.5 oz

Holds up to four airbrushes Top airbrush holder swivels to keep airbrush in desired position Bracket for mounting pressure regulator Clamps to workbench or table. One Hobbico Deluxe Airbrush Station. This is the Deluxe Airbrush Station for use with the Hobbico Airbrush
...more about the Hobbico Deluxe Air Brush Station

Compact design incorporates both the pressure regulator, filter and water trap into one convenient low-cost unit Easily serviced, no special tools required Convenient water drain on bottom of polycarbonate bowl Sturdy cast aluminum construction Hig h quality filter element removes dirt, grime, pipe scale and most solid materials 2-160 PSI (14-1103kP) adjustable range, relieving type diaphragm, locking adjustment knob One year limited warranty. One regulator and filter,
...more about the Hobbico Mini Regulator w/Filter

Metal construction Plated finish. One 5mm to 1/4'' Hose Adapter. This is the 5mm to 1/4'' Hose Adapter from Model Maker. It allows hook-ups from a 5mm hose fitting to a 1/4'' compressor
...more about the Hobbico Hose Adapter 5mm To 1/4''

To use a spare tire for pressure, insert the adaptor into the Propel regulator valve and attach to spare tire. Tire must be on a rim and inflated to 40lbs of air pressure. Instructions provided in package. One Tire Adaptor. This is the Tire Valve A dapter from Model Maker for use with an
...more about the Hobbico Tire Valve Adapter

Metal construction Plated finish Knurled for better grip. One 5mm to 1/8'' Hose Adapter. This is the 5mm to 1/8'' Hose Adapter from Model Maker. It allows hook-ups from a 5mm hose fitting to a 1/8'' compressor
...more about the Hobbico Hose Adapter 5mm To 1/8''

Metal construction Barbed end for attaching to Vinyl Hose. One Knurled Adapter Nut. One O-ring. One Barbed Adapter Fitting. This is the 1/8'' Hose Adapter w/Barbed End from Model Maker. It is for use with the DA400 and DA450
...more about the Hobbico Hose Adapter 1/8'' Barbed

Metal construction Internal 5mm threads External 1/8'' threads. One 1/8'' to 5mm adapter. This is the 1/8'' to 5mm'' adapter from Model Maker. It changes an 5mm output to a 1/8''
...more about the Hobbico Adapter 1/8'' To 5mm

Brass construction External threads, both sides Required when using the Mini Regulator (HCAR4027) with the Double Action Paint Gun (HCAR4016). One 1/8'' to 1/8'' Hose Adapter. This is the 1/8'' to 1/8'' Hose Adapter from Model
...more about the Hobbico Adapter 1/8'' To 1/8''

Metal construction Internal 1/8'' threads External 1/4'' threads. One 1/8'' to 1/4'' adapter. This is the 1/8'' to 1/4'' adapter from Model Maker. It changes an 1/8'' compressor output to a 1/4''
...more about the Hobbico Adapter 1/8'' To 1/4''

Vinyl Construction Threaded, metal end-fittings. One 6 foot Vinyl Hose. This is the six foot Vinyl Hose with 5mm end-fittings from Model
...more about the Hobbico Vinyl Hose 5mmx6'

Vinyl Hose Construction 1/8'' Fittings on both ends. One Vinyl Hose. This is the Large Vinyl Hose from Model Maker. It features 1/8''
...more about the Hobbico Vinyl Hose Large 1/8''x8.5'

Durable, braided outer skin 1/8 female threaded fittings, both ends. One 1/8 x 1/8 braided Hose. This is a 6 foot, 1/8 x 1/8 braided Hose from Model Maker. It supplies air from the air compressor to the
...more about the Hobbico Braided Hose 1/8''x1/8''x6'

Durable, braided outer skin 1/8'' female threaded fittings, both ends. One 1/8'' x 5mm braided Hose. This is a 6 foot, 1/8'' x 5mm braided Hose from Model Maker. It supplies air from the air compressor to the
...more about the Hobbico Braided Hose 1/8''x5mmx6'

Plastic construction with metal fittings For use with 5mm hose fittings. One Can Regulator. This is the Propellant Can Regulator for use with the Model Maker
...more about the Hobbico Propel Can Regulator

Attaches to airbrush and holds paint. One 3/4oz (22cc) Hobbico Airbrush Glass Jar with Lid. This is the 3/4oz (22cc) Glass Jar with Lid for the Hobbico Airbrush
...more about the Hobbico Glass Jar w/Lid 3/4oz (22cc)

Attaches to airbrush and holds paint. One 2oz (50cc) Hobbico Airbrush Glass Jar with Lid. This is the 2oz (50cc) Glass Jar with Lid for the Hobbico Airbrush
...more about the Hobbico Glass Jar w/Lid 2oz (50cc)

Metal construction Allows for easy on-the-fly color changes. One color cup. This is the 5cc Metal Paint Cup from Model Maker for use with DA450
...more about the Hobbico Metal Paint Cup 5cc

Ideal for cleaning all airbrush components Use full strength to soak nozzles and color cups overnight Dilute with 50% water to use as a flush cleaner between color changes. One bottle 3.4oz (100mL) Hobbico Airbrush Systems Cleaner. This is the Airb rush Cleaner for the Hobbico Airbrush
...more about the Hobbico Airbrush Cleaner 3.4oz SA200/200P

Sprays fine pattern Metal construction with rubber gasket. One Fine Air Tip for the Hobbico Single Action Airbrushes. This is the Fine Air Tip for the Hobbico Model Master SA Single Action Airbrushes HCAR4005,
...more about the Hobbico Air Tip Fine SA200/200P

Aluminum Construction Press-in fit. One Air Tip Bushing, part #2. This is the Air Tip Bushing for the SA200 & SA200P Model Maker Airbrushes. It is located at the front of the main airbrush
...more about the Hobbico Air Tip Bushing SA200/200P

Brass construction O-ring sealed. One Plunger. One Spring. One Plunger Nut-all part #26. This is the Plunger Assembly for the SA200 & SA200P Model Maker Airbrushes. It is an internal part that is operated via the trigger
...more about the Hobbico Plunger Assembly SA200/200P

Plastic lid construction Screw-on type assembly Aluminum paint pick-up elbow. One Jar Adapter w/paint pick-up elbow. This is the Jar Adapter for the SA200 & SA200P Model Maker Airbrushes. It provides a lid for the paint jar and acts as a paint
...more about the Hobbico Jar Adapter SA200/200P

Semi-flexible plastic tubing Solvent safe Clear in color. One Siphon Tube part #15. This is the Siphon Tube for the Jar Adapter (HCAR4157). It allow the paint to be siphoned out of the Paint Jar for delivery to the
...more about the Hobbico Siphon Tube SA200/200P