Excellent Gap-Filling Super-Glue. New $6.19 (22% off). Features: * Allows 7 to 10 seconds for positioning. * Cures in 20 seconds. * Accelerate with KICKER (paapt15). * Bonds anything, even oily surfaces! * Works best on: Metal, Wood, Rubber, Pottery, Most Plastics, Aluminum, Ceramic.

INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. New $4.99 (16% off). Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, don't spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. . Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications. High quality CAs such as INSTA-CURE, when used pr

Hot Stuff super-glues have a consistency resembling that of water and are used mainly for bonding parts which fit very well. New $8.09 (22% off). Sets in 10 seconds. Those who are sensitive to cyanoacrylate curing fumes will enjoy using new UFO (hotufo4) in place of regular HOT STUFF.

INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. New $8.19 (18% off). Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, dont spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. . Features: INSTA-CURE+ is a gap filling glue that dries in 5-15 sec.

Super 'T' has a consistency similar to that of syrup and has the ability to fill small gaps between parts which don't fit perfectly. New $8.09 (22% off). SUPER 'T' cures at a slower rate than HOT STUFF, (10-25 seconds depending on the material).

INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. New $8.19 (18% off). Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond. . Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications. High quality CAs such as INSTA-CURE, when used properly, form bonds that in many cases are stronger than the material that is being adhered.

MAXI-CURE extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. New $8.09 (19% off). When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, cloth-textured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive. It also is best for bonding the tires for R/C cars. Learn about how to Found In : Building Supplies  >  Glues  >  CA Super Glue

MAXI-CURE extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. New $3.29 (17% off). When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. . Learn about how to Select a Super Glue. Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications. High quality CAs such as INSTA-CURE, when used properly, form bonds that in many cases are stronger than the material that is being adhered. INSTA-CURE is a highly refined CA whic

IC-2000 is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. New $7.49 (25% off). The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials. Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications. High quality CAs such as INSTA-CURE, when used properly, form bonds that in many cases are stronger than the material that is being adhered. INSTA-CURE is a highly refined CA which, combined with its freshness, gives a guaranteed 2 year shelf life. CAs are reactive monomers that chemically link (polymerize) when pressed into a thin film. The very thin lay

INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. New $3.39 (15% off). Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond. . Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications. High quality CAs such as INSTA-CURE, when used properly, form bonds that in many cases are stronger than the material that is being adhered.

Excellent Gap-Filling Super-Glue. New $10.79 (22% off). Features: * Allows 7 to 10 seconds for positioning. * Cures in 20 seconds. * Accelerate with KICKER (paapt15). * Bonds anything, even oily surfaces! * Works best on: Metal, Wood, Rubber, Pottery, Most Plastics, Aluminum, Ceramic.

MAXI-CURE extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. New $4.88 (18% off). When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive. It also is best for bonding the tires for R/C cars. Learn about how to Found In : Building Supplies  >  Glues  >  CA Super Glue

Excellent Gap-Filling Super-Glue. New $3.69 (22% off). Features: * Allows 7 to 10 seconds for positioning. * Cures in 20 seconds. * Accelerate with KICKER (paapt15). * Bonds anything, even oily surfaces! * Works best on: Metal, Wood, Rubber, Pottery, Most Plastics, Aluminum, Ceramic.

Extra thin Super-Glue for bonding tight-fitting parts. New $6.19 (22% off). Features: * Super-thin penetrating formula. * Bonds in 1 to 5 seconds. * Works great on most materials, especially balsa. * Strengthens fiberglass and cloth. * Works best on: Metal, China, Rubber, Wood, Most Plastics, Potter, Aluminum, Cloth, Ceramic.

INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. New $3.39 (15% off). Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, don't spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications. High quality CAs such as INSTA-CURE, when used prop

IC-GEL is an excellent putty for plastic models. New $5.69 (18% off). It will fill any void and can be formed to many shapes. Applying INSTA-SET allows IC-GEL to be sanded or filed to final shape in less than 20 seconds. IC-GEL is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE; IC-Gel, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL can be applied at

This is a 1oz Bottle of Slo-Zap CA Glue from Pacer. New $5.99 (26% off). Not safe for foam. For foam applications use epoxy or foam-safe CA. Features: * Very high viscosity formula.. * Super thick and super strong.. * Allows approximately 30-40 seconds for part positioning.. * Cures in 90 seconds.. * Ideal for fillet forming, gap filling, wing sheeting, laminating etc.. * Use Zip Kicker (PAAR2405) to accelerate cure time..

INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. New $3.59 (40% off). Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond. Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications. High quality CAs such as INSTA-CURE, when used properly, form bonds that in many cases are stronger than the material that is being adhered. I

Excellent Gap-Filling Super-Glue. New $19.29 (22% off). Features: * Allows 7 to 10 seconds for positioning. * Cures in 20 seconds. * Accelerate with KICKER (paapt15). * Bonds anything, even oily surfaces! * Works best on: Metal, Wood, Rubber, Pottery, Most Plastics, Aluminum, Ceramic.

INSTA-FLEX clear rubber toughened has similar qualities to our black IC-2000 but can be used in applications where you do not want the adhesive to be seen. New $5.99 (33% off). . INSTA-FLEX clear rubber toughened has similar qualities to our black IC-2000 but can be used in applications where you do not want the adhesive to be seen. The carbon component of IC-2000 that gives the CA its black color also contributes to its unsurpassed strength. Since INSTA-FLEX has this carbon removed, its strength is a little less than IC-2000 but still superior to standard CA's. When esthetics are important and a flexible bond is required, INSTA-FLEX is your best choice. It forms superior bonds to soft urethane and vinyl plasti