Building Supplies Gallery Images

Tamiya #TAM74093. This is a pair of 4-7/8" Side Cutters from Tamiya.

Hobbylinc #HLC103. INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond. .

Tamiya #TAM87095. This is a tube White Plastic Model Putty from Tamiya.:.

Testors #TES1780. This is a 1/2 oz (14.7mL) glass jar of Enamel Steel Paint from Testors.

Tamiya #TAM87034. This is a 10 Meter Roll of 10mm Tamiya Masking Tape Refill.

Testors #TES1960. This is a 3 oz. (85 g) Can of Lusterless Flat Finish Spray Paint.

Tamiya #TAM81011. 23ml Jar of Tamiya X-11 Chrome Silver color Acrylic Gloss Paint.

Hobbylinc #HLCKIT-03. Supplies that picture-perfect model. The best of everything for building the highest quality models. Great gift for the experienced modeller.

Plastruct #PLS91105. The White sheets are used to construct buildings for your railroad diorama's and layouts. They may also be used for various scratch craft projects and miscellaneous projects.

Testors #TES9146. This is a Promotional Paint Set from Testors.

Testors #TES1834M. This is a Can of Wet Look Clear One Coat Lacquer Paint from Testors.

Bare-Metal-Foil #BMF1. This is the 6 x 11 Thin Sheet New Improved Chrome Foil by Bare Metal Foil.

Tamiya #TAM81360. 23ml Jar of Tamiya XF-60 Dark Yellow color Acrylic Flat (Matt) Paint.

K-S #K+S8102.

Revell-Monogram #RMXRMXR7016. This is the Flexible Sanding Stick Set from Revell.

Tamiya #TAM81010. 23ml Jar of Tamiya X-10 Gun Metal color Acrylic Gloss Paint.

Testors #TES1747. This is a 1/2 oz (14.7mL) glass jar of Enamel Gloss Black Paint from Testors.

Plastruct #PLS90682. These Gray Styrene Plastic Handrails.

K-S #K+S296. This is a Tubing Cutter from K&S Engineering.

Squadron #SQU10205. This is a Precision Putty Applicator used for applying putty to models.