Building Supplies
Shop online for over 11,900 building supplies at discounts up to 88%. Paints is the most popular of the 14 building supplies categories, then Glues, and Hand Tools. Tamiya is ranked #1 out of 144 building supplies manufacturers, followed by Testors, and Vallejo Acrylic Paints.
Sub-Categories for Building Supplies
Products of Building Supplies
Hobbylinc # hlc107
Add To Cart | Wish List |
INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, don't spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. .
Testors # tes3503
Add To Cart | Wish List |
This is a 5/8oz Tube of Fast Wood Cement for Wood Models from Testors.
Tamiya # tam81301
Add To Cart | Wish List |
23ml Jar of Tamiya XF-1 Black color Acrylic Flat (Matt) Paint.
Tamiya # tam87038
Add To Cart | Wish List |
Extra-thin plastic model cement with applicator brush. Used to glue parts already held together. The thin glue will wick into the joint for a firm bond.
Website security verified by GoDaddy
Tamiya # tam87131
Add To Cart | Wish List |
This is the 1.35fl oz (40ml) Bottle of Tamiya Panel Line Accent Paint in Clear Black.
Badger # bad250-3
Pre-Order | Wish List |
The Model 250 single action, external mix, bottom feed spray gun is great for any job requiring a simple, yet effective spray. The Model 250 is basic enough for children, (ages 8 and up) to use with minimal adult supervision, yet effective enough for adult use. This gun is perfect for jobs requiring large overall coverage with medium to heavy viscosity materials. Modeling, school projects, home improvement projects, workshop jobs, ceramic underglazing, fogging, texturing and stenciling can all be handled by the Model 250. The spray pattern can be adjusted from ¾" to 2" simply by turning the paint tip. The Model 250 uses ¾ oz. or 2 oz. capacity jars. .
Tamiya # tam81040
Add To Cart | Wish List |
This is a 250ml Bottle of Tamiya color Acrylic Paint (Thinner).
Tamiya # tam87044
Add To Cart | Wish List |
180ml Spray Can of Tamiya's Surface Primer L (White) for Plastic and Metal.
Tamiya # tam87042
Add To Cart | Wish List |
180ml Spray Can of Tamiya's Surface Primer L (Gray) for Plastic and Metal.
Testors # tes3501
Add To Cart | Wish List |
This is a 5/8oz Tube of Cement for Plastic Models from Testors. For Ages 8 and Up.
Testors # tes1149tt
Add To Cart | Wish List |
This is a 1/4oz (7.5ml) glass jar of Enamel Paint from Testors.
Tamiya # tam81302
Add To Cart | Wish List |
23ml Jar of Tamiya XF-2 White color Acrylic Flat (Matt) Paint.
SALE
23% Off
Hobbylinc # hlc108
Add To Cart | Wish List |
INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, dont spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. .
Tamiya # tam87064
Add To Cart | Wish List |
180ml Spray Can of Tamiya's Fine Surface Primer L (Gray) for Plastic and Metal.