Building Supplies

This is the 1.35fl oz (40ml) Bottle of Tamiya Panel Line Accent Paint in Clear Black.

23ml Jar of Tamiya XF-1 Black color Acrylic Flat (Matt) Paint.

INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, don't spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. .

Extra-thin plastic model cement with applicator brush. Used to glue parts already held together. The thin glue will wick into the joint for a firm bond.

This is a Package of 20 strips of 1/8" x 1/8" x 24" Basswood from Midwest Products Co.

This is the Atlas-Brush Camel Hair 5-piece Brush Set hobby and model paint brushes.

This is a 250ml Bottle of Tamiya color Acrylic Paint (Thinner).

This is a 1/4oz (7.5ml) glass jar of Enamel Paint from Testors.

180ml Spray Can of Tamiya's Surface Primer L (White) for Plastic and Metal.

These Gray Styrene Plastic Handrails.

Replacement top that is on all of BSI's non-Pocket CAs.

180ml Spray Can of Tamiya's Surface Primer L (Gray) for Plastic and Metal.

This is a 5/8oz Tube of Cement for Plastic Models from Testors. For Ages 8 and Up.

This is a 3/4 Oz. Glass Paint Jar with Cover from Badger.

The Model 250 single action, external mix, bottom feed spray gun is great for any job requiring a simple, yet effective spray. The Model 250 is basic enough for children, (ages 8 and up) to use with minimal adult supervision, yet effective enough for adult use. This gun is perfect for jobs requiring large overall coverage with medium to heavy viscosity materials. Modeling, school projects, home improvement projects, workshop jobs, ceramic underglazing, fogging, texturing and stenciling can all be handled by the Model 250. The spray pattern can be adjusted from ¾" to 2" simply by turning the paint tip. The Model 250 uses ¾ oz. or 2 oz. capacity jars. .

This is a 6 Meter Roll of 6mm Tamiya Masking Tape Refill.

23ml Jar of Tamiya XF-2 White color Acrylic Flat (Matt) Paint.

This is the .016x1/4" Brass Strip from K&S Precision Metals.

This is the 1/4 x 12" Round Brass Tube from K&S Precision Metals.

100ml Can of Tamiya Black Polycarbonate Spray Paint.