> Building Supplies > Hobbylinc
Hobbylinc Building Supplies with Pictures
Online shopping for 53 hobbylinc building supplies with pictures, saving you up to 38%.
1-50 of 53 : page 1/2
1 2
SORT BY:  
Popularity
Discount
Cost ↑
Cost ↓
Product
INSTA-CURE Gap Filling Cyanoacrylate 2oz Hobby CA Super Glue #108
INSTA-CURE Gap Filling Cyanoacrylate 2oz
Hobby CA Super Glue
Hobbylinc # hlc108
$9.99 $8.19
  Add To Cart
Wish List
User Gallery Examples
INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, dont spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. .
Extra Cyanoacrylate Tops CA Glue Tip Glue Applicator #312
Extra Cyanoacrylate Tops
CA Glue Tip Glue Applicator
Hobbylinc # hlc312
$0.75 $0.60
  Add To Cart
Wish List
User Gallery Examples
Replacement top that is on all of BSI's non-Pocket CAs.
QUICK CURE 5 Minute Epoxy (9oz) Hobby Epoxy #202
QUICK CURE 5 Minute Epoxy (9oz)
Hobby Epoxy
Hobbylinc # hlc202
$18.99 $15.20
  Add To Cart
Wish List
User Gallery Examples
QUIK-CURE 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE shouldn't be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE can be handled after 15 minutes. Full strength is reached in 1 hour.
INSTA-CURE Gap Filling Cyanoacrylate 1oz Hobby CA Super Glue #107
INSTA-CURE Gap Filling Cyanoacrylate 1oz
Hobby CA Super Glue
Hobbylinc # hlc107
$5.99 $4.99
  Add To Cart
Wish List
User Gallery Examples
INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, don't spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. .
MAXI-CURE Extra Thick Cyanoacrylate 2oz Hobby CA Super Glue #113
MAXI-CURE Extra Thick Cyanoacrylate 2oz
Hobby CA Super Glue
Hobbylinc # hlc113
$9.99 $7.79
SALE
22% Off
  Add To Cart
Wish List
User Gallery Examples
MAXI-CURE extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, cloth-textured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive. It also is best for bonding the tires for R/C cars.
INSTA-CURE Gap Filling Cyanoacrylate 1/2oz Hobby CA Super Glue #106
INSTA-CURE Gap Filling Cyanoacrylate 1/2oz
Hobby CA Super Glue
Hobbylinc # hlc106
$3.99 $3.39
  Add To Cart
Wish List
INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, don't spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.
QUICK CURE 5 Minute Epoxy (4 1/2oz) Hobby Epoxy #201
QUICK CURE 5 Minute Epoxy (4 1/2oz)
Hobby Epoxy
Hobbylinc # hlc201
$11.99 $9.59
  Add To Cart
Wish List
QUIK-CURE 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE shouldn't be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE can be handled after 15 minutes. Full strength is reached in 1 hour.
INSTA-SET Cyanoacrylate Accelator 2oz Hobby CA Super Glue Accelerator #151
INSTA-SET Cyanoacrylate Accelator 2oz
Hobby CA Super Glue Accelerator
Hobbylinc # hlc151
$5.99 $4.99
  Add To Cart
Wish List
User Gallery Examples
INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization.
Extra Fine Extender Tips (6) Glue Tip Glue Applicator #302
Extra Fine Extender Tips (6)
Glue Tip Glue Applicator
Hobbylinc # hlc302
$3.99 $3.19
  Add To Cart
Wish List
For use over the standard #312 top, it allows BSI's thin CAs (Insta-Cure, Insta-Flex and Super-Gold) to be applied a drop at a time.
INSTA-CURE Super Thin Cyanoacrylate 2oz Hobby CA Super Glue #103
INSTA-CURE Super Thin Cyanoacrylate 2oz
Hobby CA Super Glue
Hobbylinc # hlc103
$9.99 $8.19
  Add To Cart
Wish List
User Gallery Examples
INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond. .
Deluxe Hobby Kit Miscellaneous Hand Tool Assortment #kit-03
Deluxe Hobby Kit
Miscellaneous Hand Tool Assortment
Hobbylinc # hlckit-03
$37.67 $26.99
  Add To Cart
Wish List
User Gallery Examples
Supplies that picture-perfect model. The best of everything for building the highest quality models. Great gift for the experienced modeller.
MAXI-CURE Extra Thick Cyanoacrylate 1oz Hobby CA Super Glue #112
MAXI-CURE Extra Thick Cyanoacrylate 1oz
Hobby CA Super Glue
Hobbylinc # hlc112
$5.99 $4.88
  Add To Cart
Wish List
MAXI-CURE extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive. It also is best for bonding the tires for R/C cars.
INSTA-CURE Super Thin Cyanoacrylate 1/2oz Hobby CA Super Glue #101
INSTA-CURE Super Thin Cyanoacrylate 1/2oz
Hobby CA Super Glue
Hobbylinc # hlc101
$3.99 $3.39
  Add To Cart
Wish List
User Gallery Examples
INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond. .
MAXI-CURE Extra Thick Cyanoacrylate 1/2oz Hobby CA Super Glue #111
MAXI-CURE Extra Thick Cyanoacrylate 1/2oz
Hobby CA Super Glue
Hobbylinc # hlc111
$3.99 $3.29
  Add To Cart
Wish List
User Gallery Examples
MAXI-CURE extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. . Learn about how to Select a Super Glue.
Insta-Flex Clear Rubber Toughened Cyanoacrylate Hobby CA Super Glue #120
Insta-Flex Clear Rubber Toughened Cyanoacrylate
Hobby CA Super Glue
Hobbylinc # hlc120
$8.99 $5.99
SALE
33% Off
  Add To Cart
Wish List
INSTA-FLEX clear rubber toughened has similar qualities to our black IC-2000 but can be used in applications where you do not want the adhesive to be seen. .
MID CURE 15 Minute Epoxy (9oz) Hobby Epoxy #204
MID CURE 15 Minute Epoxy (9oz)
Hobby Epoxy
Hobbylinc # hlc204
$18.99 $15.20
  Add To Cart
Wish List
MID-CURE 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE in most applications. MID-CURE is our most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength.
UN-CURE Cyanoacrylate Debonder 1oz Hobby CA Super Glue Debonder #161
UN-CURE Cyanoacrylate Debonder 1oz
Hobby CA Super Glue Debonder
Hobbylinc # hlc161
$3.99 $3.39
  Add To Cart
Wish List
UN-CURE debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water.
INSTA-CURE Super Thin Cyanoacrylate 1oz Hobby CA Super Glue #102
INSTA-CURE Super Thin Cyanoacrylate 1oz
Hobby CA Super Glue
Hobbylinc # hlc102
$5.99 $4.99
  Add To Cart
Wish List
INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.
Basic Hobby Kit Miscellaneous Hand Tool Assortment #kit-01
Basic Hobby Kit
Miscellaneous Hand Tool Assortment
Hobbylinc # hlckit-01
$13.89 $9.49
SALE
32% Off
  Add To Cart
Wish List
All the supplies needed for basic model building. Great addition to any model purchase.
INSTA-CURE Gap Filling CA 8 oz REFILL Hobby CA Super Glue #109
INSTA-CURE Gap Filling CA 8 oz REFILL
Hobby CA Super Glue
Hobbylinc # hlc109
$29.99 $24.39
  Add To Cart
Wish List
INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, dont spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. .
INSTA-SET Refill Cyanoacrylate 8oz Hobby CA Super Glue Accelerator #152
INSTA-SET Refill Cyanoacrylate 8oz
Hobby CA Super Glue Accelerator
Hobbylinc # hlc152
$11.99 $8.99
  Add To Cart
Wish List
User Gallery Examples
INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization.
SLOW CURE 30 Minute Epoxy (9oz) Hobby Epoxy #206
SLOW CURE 30 Minute Epoxy (9oz)
Hobby Epoxy
Hobbylinc # hlc206
$18.99 $15.20
  Add To Cart
Wish List
SLOW-CURE 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE can be used for bonding if you're willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE and FINISH-CURE to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.
Trust 1000's of Reviews of Hobbylinc
Website security verified by GoDaddy
Industry Leading Loyalty Program
Buy - Earn - Save
Sign-Up for Specials, Coupons, & More
Easy, Quick and Hassle Free Returns for 30 Day
Extender Tips (6) Glue Tip Glue Applicator #301
Extender Tips (6)
Glue Tip Glue Applicator
Hobbylinc # hlc301
$2.99 $2.39
  Add To Cart
Wish List
For use over BSI's standard #312 top. Can be used with all thicknesses of CA except IC-Gel. The flexible tip can be cut to the length and/or inside diameter that is needed for a particular application.
Insta-Set 3.75 fl oz Aerosol Accelerator F.S. Hobby CA Super Glue #155
Insta-Set 3.75 fl oz Aerosol Accelerator F.S.
Hobby CA Super Glue
Hobbylinc # hlc155
$11.99 $8.49
SALE
29% Off
  Add To Cart
Wish List
INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization.
IC-2000 Black Rubber Toughened CA (1 oz.) Hobby CA Super Glue #118
IC-2000 Black Rubber Toughened CA (1 oz.)
Hobby CA Super Glue
Hobbylinc # hlc118
$9.99 $7.89
  Add To Cart
Wish List
IC-2000 is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials.
IC-Gel Ethyl Cyanoacrylate Gel .7oz Hobby CA Super Glue #116
IC-Gel Ethyl Cyanoacrylate Gel .7oz
Hobby CA Super Glue
Hobbylinc # hlc116
$6.99 $5.69
  Add To Cart
Wish List
IC-GEL is an excellent putty for plastic models. It will fill any void and can be formed to many shapes. Applying INSTA-SET allows IC-GEL to be sanded or filed to final shape in less than 20 seconds.
INSTA-CURE Super Thin Cyanoacrylate 8 oz REFILL Hobby CA Super Glue #104
INSTA-CURE Super Thin Cyanoacrylate 8 oz REFILL
Hobby CA Super Glue
Hobbylinc # hlc104
$29.99 $24.39
  Add To Cart
Wish List
INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond. .
Insta-Flex Flexible Thin Cyanoacrylate Hobby CA Super Glue #119
Insta-Flex Flexible Thin Cyanoacrylate
Hobby CA Super Glue
Hobbylinc # hlc119
$9.99 $6.19
SALE
38% Off
  Add To Cart
Wish List
INSTA-FLEX flexible thin CA is ideal for many applications, including the installation of CA hinges. When cured, INSTA-FLEX does not turn brittle and remains clear, even if accelerated with INSTA-SET. It has superior shock resistance. Although not as thin in consistency as INSTA-CURE, INSTA-FLEX still has good penetrating qualities and its application can be easier to control. .
MAXI-CURE Extra Thick Cyanoacrylate 8 oz REFILL Hobby CA Super Glue #114
MAXI-CURE Extra Thick Cyanoacrylate 8 oz REFILL
Hobby CA Super Glue
Hobbylinc # hlc114
$29.99 $24.89
SALE
17% Off
  Add To Cart
Wish List
MAXI-CURE extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, cloth-textured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive. It also is best for bonding the tires for R/C cars. Learn about how to
SUPER_GOLD Thin ODORLESS Insta-Cure 1/2oz Hobby CA Super Glue #121
  Add To Cart
Wish List
SUPER-GOLD and SUPER-GOLD+ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. .
SUPER_GOLD Gap Filling Insta-Cure 1oz Hobby CA Super Glue #127
SUPER_GOLD Gap Filling Insta-Cure 1oz
Hobby CA Super Glue
Hobbylinc # hlc127
$15.99 $13.09
  Add To Cart
Wish List
SUPER-GOLD and SUPER-GOLD+ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond.
SUPER_GOLD Gap Filling Insta-Cure 1/2oz Hobby CA Super Glue #126
SUPER_GOLD Gap Filling Insta-Cure 1/2oz
Hobby CA Super Glue
Hobbylinc # hlc126
$8.99 $7.39
  Add To Cart
Wish List
SUPER-GOLD and SUPER-GOLD+ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond.
IC-2000 Rubber Toughened CA 1/2 oz. Hobby CA Super Glue #117
IC-2000 Rubber Toughened CA 1/2 oz.
Hobby CA Super Glue
Hobbylinc # hlc117
$6.99 $5.59
  Add To Cart
Wish List
IC-2000 is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials.
Intermediate Hobby Kit Miscellaneous Hand Tool Assortment #kit-02
Intermediate Hobby Kit
Miscellaneous Hand Tool Assortment
Hobbylinc # hlckit-02
$25.79 $18.48
  Add To Cart
Wish List
All the supplies needed for the intermediate modeller. Set includes quality items to produce stunning results.
SUPER_GOLD Thin ODORLESS Insta-Cure 1oz Hobby CA Super Glue #122
SUPER_GOLD Thin ODORLESS Insta-Cure 1oz
Hobby CA Super Glue
Hobbylinc # hlc122
$15.99 $13.09
  Add To Cart
Wish List
SUPER-GOLD and SUPER-GOLD+ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. .
SUPER_GOLD Thin ODORLESS Insta-Cure 2oz Hobby CA Super Glue #123
SUPER_GOLD Thin ODORLESS Insta-Cure 2oz
Hobby CA Super Glue
Hobbylinc # hlc123
$29.99 $24.39
  Add To Cart
Wish List
SUPER-GOLD and SUPER-GOLD+ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. .
SLOW CURE 30 Minute Epoxy (4 1/2oz) Hobby Epoxy #205
SLOW CURE 30 Minute Epoxy (4 1/2oz)
Hobby Epoxy
Hobbylinc # hlc205
$11.99 $8.99
SALE
25% Off
  Add To Cart
Wish List
SLOW-CURE 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE can be used for bonding if you're willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE and FINISH-CURE to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.
SUPER_GOLD Gap Filling Insta-Cure 2oz Hobby CA Super Glue #128
SUPER_GOLD Gap Filling Insta-Cure 2oz
Hobby CA Super Glue
Hobbylinc # hlc128
$29.99 $23.49
SALE
22% Off
  Add To Cart
Wish List
SUPER-GOLD and SUPER-GOLD+ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond.
MID CURE 15 Minute Epoxy (4 1/2oz) Hobby Epoxy #203
MID CURE 15 Minute Epoxy (4 1/2oz)
Hobby Epoxy
Hobbylinc # hlc203
$11.99 $9.59
  Add To Cart
Wish List
MID-CURE 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE in most applications. MID-CURE is our most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength.
Foam Cure 4 oz EPP Foam Glue Hobby CA Super Glue #142
Foam Cure 4 oz EPP Foam Glue
Hobby CA Super Glue
Hobbylinc # hlc142
$5.99 $4.88
  Add To Cart
Wish List
This is a crystal clear EPP Foam Glue that has a flexible foam-cure unlike other CA glues that stiffen.
FINISH CURE 20 Minute Epoxy (4 1/2oz) Hobby Epoxy #209
FINISH CURE 20 Minute Epoxy (4 1/2oz)
Hobby Epoxy
Hobbylinc # hlc209
$15.99 $12.80
  Add To Cart
Wish List
FINISH-CURE 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light we
INsta-Cure Pocket CA 3/4 oz. Super Thin CA W/Pin in cap Hobby CA Super Glue #131
INsta-Cure Pocket CA 3/4 oz. Super Thin CA W/Pin in cap
Hobby CA Super Glue
Hobbylinc # hlc131
$4.99 $3.79
  Add To Cart
Wish List
INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.
Inst-Cure+ Pocket CA 4oz Gap Filling W/Pin in cap Hobby CA Super Glue #134
Inst-Cure+ Pocket CA 4oz Gap Filling W/Pin in cap
Hobby CA Super Glue
Hobbylinc # hlc134
$16.98 $12.89
  Add To Cart
Wish List
INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, don't spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.
Foam Cure 1 oz EPP Foam Glue Hobby CA Super Glue #141
Foam Cure 1 oz EPP Foam Glue
Hobby CA Super Glue
Hobbylinc # hlc141
$2.99 $2.49
  Add To Cart
Wish List
This is a crystal clear EPP Foam Glue that has a flexible foam-cure unlike other CA glues that stiffen.
IC-LOC - Blue 1/3 fl oz Medium Strength Thread Locker Hobby CA Super Glue #171
IC-LOC - Blue 1/3 fl oz Medium Strength Thread Locker
Hobby CA Super Glue
Hobbylinc # hlc171
$5.99 $4.69
  Add To Cart
Wish List
Threadloc Blue is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-Loc Blue is cured, the fasteners can be disassembled with standard hand tools if required.
FINISH CURE 20 Minute Epoxy (13oz) Hobby Epoxy #210
FINISH CURE 20 Minute Epoxy (13oz)
Hobby Epoxy
Hobbylinc # hlc210
$38.99 $29.24
SALE
25% Off
  Add To Cart
Wish List
FINISH-CURE 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light we
Inst-Cure+ Pocket Ca 1/4oz. Gap Filling CA W/Pin in cap Hobby CA Super Glue #133
Inst-Cure+ Pocket Ca 1/4oz. Gap Filling CA W/Pin in cap
Hobby CA Super Glue
Hobbylinc # hlc133
$4.99 $3.69
  Add To Cart
Wish List
INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, don't spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.
Super-Gold+ Pocket CA 3/4oz Foam Safe CA W/Pin in cap Hobby CA Super Glue #139
Super-Gold+ Pocket CA 3/4oz Foam Safe CA W/Pin in cap
Hobby CA Super Glue
Hobbylinc # hlc139
$12.49 $9.49
  Add To Cart
Wish List
SUPER-GOLD and SUPER-GOLD+ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. The Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for keeping in your tool or field box, just like our IC-Gel. One disadvantage that the new Pocket CA top has is the bluntness of the nozzle. This makes it more difficult to apply small amounts of the CA, especially in tight places.
IC-LOC - Blue 1.69 fl oz Medium Strength Thread Locker Hobby CA Super Glue #172
IC-LOC - Blue 1.69 fl oz Medium Strength Thread Locker
Hobby CA Super Glue
Hobbylinc # hlc172
$13.99 $10.19
SALE
27% Off
  Add To Cart
Wish List
Threadloc Blue is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-Loc Blue is cured, the fasteners can be disassembled with standard hand tools if required.
Maxi-Cure Pocket CA 4oz Extra Thick CA W/Pin in cap Hobby CA Super Glue #136
Maxi-Cure Pocket CA 4oz Extra Thick CA W/Pin in cap
Hobby CA Super Glue
Hobbylinc # hlc136
$16.98 $12.29
SALE
28% Off
  Add To Cart
Wish List
MAXI-CURE extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic.
Refine Products Listed
by Category,Brand,On-Sale,Filters,etc
← Swipe to View All →
Subcategory
Filter Results
Clearance Sale
New Releases
Company
clear
Testors (1,042)
Tamiya (621)
K-S (377)
Plastruct (440)
Vallejo (1,474)
Midwest (313)
Excel (315)
Badger (476)
AK (537)
A-Line (3)
Abteilung (153)
Airfix (2)
AKA (4)
Alclad (68)
Allied (4)
Bandai (35)
Bondic (2)
Brag (21)
Brushes (22)
Busch (2)
CGM (7)
Chemco (1)
Chemco (2)
Chooch (3)
Devcon (9)
Dremel (122)
Du-bro (62)
Duco (2)
Dyna (18)
Embee (7)
Evergreen (208)
Faller (21)
Gyros (1)
Hataka (96)
Humbrol (56)
Integy (33)
Iwata (47)
JTP (38)
JTT (5)
Kadee (7)
Krylon (13)
Latina (18)
Long (13)
Mascot (123)
MIG (61)
MIP (33)
Molotow (17)
Monroe (56)
Noch (1)
Novus (5)
Paasche (101)
Pacer (40)
Pactra (33)
RB (24)
RJSpeed (10)
Robart (9)
Scalecoat (103)
X-acto (23)
Xuron (42)
Zap (1)
Zona (109)
Savings - Selection - Service
All
All Hobbylinc
Models
Trains
Rockets
Supplies
Arts/Craft
Books
Diecast
FreeFlight
Science
Slotcar
Toys
Woodboat
Account
Share
Cart