Hobbylinc Building Supplies On Sale
Shop online for 4 hobbylinc building supplies on sale at discounts up to 28%.
Sub-Categories for Hobbylinc Building Supplies On Sale
Products of Hobbylinc Building Supplies On Sale
SALE
28% Off
Hobbylinc # hlc161
Add To Cart | Wish List |
UN-CURE debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water.
SALE
28% Off
Hobbylinc # hlc210
Add To Cart | Wish List |
FINISH-CURE 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light we
SALE
27% Off
Hobbylinc # hlc171
Add To Cart | Wish List |
Threadloc Blue is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-Loc Blue is cured, the fasteners can be disassembled with standard hand tools if required.
SALE
28% Off
Hobbylinc # hlc136
Add To Cart | Wish List |
MAXI-CURE extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic.