Glues

Hobbylinc #HLC118. IC-2000 is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials.

Flex-I-File #FLX7000.

Hobbico #HCAHCAR3785. Perfect for applying grease or glue in tight places, this is the 12cc Curved Tip Hobby Syringe from Hobbico.

Hobbylinc #HLC155. INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization.

Testors #TES3517CT. This is a 1/5 Oz. Bottle of Super Glue from Testors. For Ages 13 and Older.

Bob-Smith #BSI107.

Testors #TES8876C. This is a 1/2 Oz. Applicator of Clear Parts Cement & Window Maker from Testors.

Hot-Stuff #HOTUS-1. This is a 2 oz. Bottle of Hot Stuff Ultra Super Solvent for cyanoacrylate instant glues. This alcohol/nitroalkanes based solvent is for adult use only.

Great-Planes #GPMGPMR6009. The Pro CA Glues are clog-resistant with extra-long applicator tips to easily reach into tight spots. Easy to squeeze bottles aid in applying just the right amount of glue-for easier sanding and less mess. All Great Planes CA glues have a satisfaction guarantee, best if used by date and are clear. Wicks quickly for instant bonds on tight-fitting parts, tacking and CA hinges.

Hobbylinc #HLC104. INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond. .

CGM #CGM771. This is a Bottle of Brush-on Super Jet Medium CA from Carl Goldberg. Not safe for foam. For foam applications use Epoxy or Foam-Safe CA.

Testors #TES3523X. This is a 5/8 Oz. Tube of Non-Toxic Cement for Plastic Models from Testors. For Ages 8 and Up.

Devcon #DEV62435. This is the 1oz (29.5ml) tube of Duco Cement from Devcon.

Pacer #PAAPT20. This is a 1oz Bottle of Slo-Zap CA Glue from Pacer. Not safe for foam. For foam applications use epoxy or foam-safe CA.

Testors #TES3527C. This is 1oz of Non-Toxic Liquid Cement for Plastic Models from Testors.

Hobbylinc #HLC119. INSTA-FLEX flexible thin CA is ideal for many applications, including the installation of CA hinges. When cured, INSTA-FLEX does not turn brittle and remains clear, even if accelerated with INSTA-SET. It has superior shock resistance. Although not as thin in consistency as INSTA-CURE, INSTA-FLEX still has good penetrating qualities and its application can be easier to control. .

Testors #TES3516X. This is a 5/8oz Tube of Cement for Plastic Models from Testors. For Ages 8 and Up.

Hobbylinc #HLC301. For use over BSI's standard #312 top. Can be used with all thicknesses of CA except IC-Gel. The flexible tip can be cut to the length and/or inside diameter that is needed for a particular application.

Flex-I-File #FLX711.

Pacer #PAAPT01. Excellent Gap-Filling Super-Glue Zap-A-Gap 2 oz bottle from Pacer Glues..