1-3 of 3 results in Building Supplies > Glues > CA Super Glue

2 Ounce CA Super Glue Gallery Images

Online shopping for 2 ounce ca super glue gallery images.

3 2 Ounce CA Super Glue Gallery Images Products

Hobbylinc INSTA-CURE Gap Filling Cyanoacrylate 2oz Hobby CA Super Glue #108
18%
Off

INSTA-CURE Gap Filling Cyanoacrylate 2oz

Hobby CA Super Glue

$9.99
$8.19
 
In Stock
Earn
233
Rewards
Hobbylinc #HLC108. INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, dont spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. .
 
(51)
Location : CA Super Glue
Hobbylinc MAXI-CURE Extra Thick Cyanoacrylate 2oz Hobby CA Super Glue #113
19%
Off

MAXI-CURE Extra Thick Cyanoacrylate 2oz

Hobby CA Super Glue

$9.99
$8.09
 
In Stock
Earn
231
Rewards
Hobbylinc #HLC113. MAXI-CURE extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, cloth-textured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE or any other adhesive. It also is best for bonding the tires for R/C cars.
 
(43)
Location : CA Super Glue
Hobbylinc INSTA-CURE Super Thin Cyanoacrylate 2oz Hobby CA Super Glue #103
18%
Off

INSTA-CURE Super Thin Cyanoacrylate 2oz

Hobby CA Super Glue

$9.99
$8.19
 
In Stock
Earn
233
Rewards
Hobbylinc #HLC103. INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond. .
 
(47)
Location : CA Super Glue
The #1 Source for Hobby Products!
Help
Account
Cart
x
Close This Window