AKA, Vallejo or St-Louis Hobby and Model Paint

200ml bottle from Vallejo paints of Medium designed to improve the flow and delay the drying of paint on the needle while airbrushing. It is recommended to ad 1-2 drops of Flow Improver to 10 drops of paint in the cup of the airbrush.

This is the 200ml Bottle Grey Primer from Vallejo.

This is the 200ml Bottle Black Primer from Vallejo.

Airbrush Cleaner from Vallejo is an indispensable product for cleaning the airbrush between colors. It not only eliminates rests of the color used, but at the same time lubricates the interior of the airbrush without damaging the mechanism.

60ml bottle from Vallejo paints of Medium designed to improve the flow and delay the drying of paint on the needle while airbrushing. It is recommended to ad 1-2 drops of Flow Improver to 10 drops of paint in the cup of the airbrush.

200ml bottle of Thinner for Model Air and Liquid Acrylic. Thiner used to extend the colors, to increase fluidiy and delay the drying time. We recommend the addition of a few drops of thinner to the colors while airbrushing.

This is the 60ml Bottle Grey Primer from Vallejo.

This is the 60ml Bottle Thinner Medium from Vallejo.

This is the 200ml Bottle Black Wash from Vallejo.

A colorless glaze in a 60ml Bottle from Vallejo which is used to mix with acrylic colors; improves fluidity, increases transparency, and slows drying time. Ideal for shadows, shadings, glazes and working with pigments.

A modelling paste which dries to a white, totally opaque, stone hard finish. It is used principally for rebuilding or restructuring models and miniatures, for textures and high reliefs.

This is the 35ml Bottle Chipping Medium Water Based from Vallejo.

Waterbased acrylic varnish with new, quick drying formula, and an acrylic resin of extraordinary hardness and permanence. Protects painted models from dust and scratches, dirt and humidity. Acrylic Varnish should never be applied until the paint has dried completely (see note), and it is recommended to wait at least 24 hours. Varnish should be applied in fine coats at approximately 5-10 minutes intervals.

Used to reserve areas which are to remain unpainted, especially in airbrush techniques, but also with watercolours and temperas. Liquid Mask forms a protective film on the area which the artists does not want to paint. Once the work is dry, liquid mask is rubbed off with an eraser or piece of cloth, revealing unpainted area.

Waterbased acrylic varnish with new, quick drying formula, and an acrylic resin of extraordinary hardness and permanence. Protects painted models from dust and scratches, dirt and humidity. Acrylic Varnish should never be applied until the paint has dried completely (see note), and it is recommended to wait at least 24 hours. Varnish should be applied in fine coats at approximately 5-10 minutes intervals.

Collection of 16 color sets of Model Air for painting models and miniatures. Each one of these sets has a selection of special colors for painting vehicles, figures, etc. Contains 16 bottles of 17 ml. (with eyedropper) and color chart from Vallejo Paints.

This is the 200ml Bottle White Primer from Vallejo.

32ml bottle from Vallejo paints of Medium designed to improve the flow and delay the drying of paint on the needle while airbrushing. It is recommended to ad 1-2 drops of Flow Improver to 10 drops of paint in the cup of the airbrush.

A colorless glaze which is used to mix with acrylic colors; improves fluidity, increases transparency, and slows drying time. Ideal for shadows, shadings, glazes and working with pigments.