|
|
These are E-Z Command® Decoders with NMRA 8 Pin Plug by Bachmann®. Suitable for Ages 8 & Older. Features: * E-Z Command® basic 1 amp locomotive decoders. * NMRA 8 pin plug wiring configuration for DCC-ready locomotives. * Compatible with NMRA-compliant DCC systems. * Programming on the main. * Service mode decoder lock for changing the address on the layout. * Control speed, direction and lighting functions (including dimming). * Ops mode programming. * 28/128 speed steps. * 2- ro 4-digit addressing. * Advanced consisting. * Acceleration, deceleration, and start voltage adjustment. * Operation on standard DC systems (analog operation) possible, and is a feature that can be
...more about the Bachmann E-Z Command Decoder w/NMRA Plug (3)
|
|
|
|
|
|
This is the Atlas® Quantum Engineer Controller. Suitable for Ages 10 & Older. Features: * Allows DC users of Atlas Master Gold Series locomotives to take advantage of all the QSI® Quantum System sound features without special equipment or wiring. * Access the horn and bell sounds, as well as different engine settings and effects such as number lights, flanges, dynamic brakes, coupler sounds, blower/fans, reverse lights and tons more! Access other advanced features such as programming options, locomotive braking, locomotive shut-down and start-up procedures, verbal scale speed readout and more! Set up is nothing!. simply wire in between a standard DC power pack and the track
...more about the Atlas Quantum Engineer Controller (QSI) HO
|
This is the E-Z Command® Wireless Dynamis by Bachmann®. Suitable for Ages 8 & Older. Features: Two-way wireless infrared operation Constant digital information updates of handset command to locomotive, and of locomotive performance back to handset Joystick control for locomotive selection and speed Programming on the main 9,999 locomotive addresses Supports 14, 28 or 128 speed steps Full CV programming Turnout and accessory control Easy-to-use backlit LCD screen Control of up to 40 locomotives at any one time (up to 21 functions per locomotive) Allows 40 consists of up to five locomotives each Universally compatible track connection Expandable modular design Four AA batteri
...more about the Bachmann E-Z Command Dynamis Wireless DCC
|
This is the E-Z Command® Dynamis Wireless Handset by Bachmann®. Suitable for Ages 14 & Older. Features: * The use of additional handsets provides multiple person operation of your railroad. * Use with Dynamis Pro Box (BACU4398) and Dynamis DCC system (BACU4400) to increase the number of engineers operating locomotives. * Four handsets can be used simultaneously with the Dynamis Pro System.
...more about the Bachmann E-Z Command Dynamis Wireless DCC System Handset
|
|
|
|
This is the E-Z Command® Wireless Dynamis with Free Unpainted Dash 9 HO Locomotive by Bachmann®. Suitable for Ages 8 & Older. Features: Two-way wireless infrared operation Constant digital information updates of handset command to locomotive, and of locomotive performance back to handset Joystick control for locomotive selection and speed Programming on the main 9,999 locomotive addresses Supports 14, 28 or 128 speed steps Full CV programming Turnout and accessory control Easy-to-use backlit LCD screen Control of up to 40 locomotives at any one time (up to 21 functions per locomotive) Allows 40 consists of up to five locomotives each Universally compatible track connection
...more about the Bachmann EZ Command Wireless Dynamis w/Dash 9 Combo HO
|
This is the E-Z Command® Wireless Dynamis with Free Unpainted SD45 HO Locomotive by Bachmann®. Suitable for Ages 8 & Older. Features: Two-way wireless infrared operation Constant digital information updates of handset command to locomotive, and of locomotive performance back to handset Joystick control for locomotive selection and speed Programming on the main 9,999 locomotive addresses Supports 14, 28 or 128 speed steps Full CV programming Turnout and accessory control Easy-to-use backlit LCD screen Control of up to 40 locomotives at any one time (up to 21 functions per locomotive) Allows 40 consists of up to five locomotives each Universally compatible track connection Ex
...more about the Bachmann EZ Command Wireless Dynamis w/SD45 Loco Combo HO
|
This is a Power Pack and Speed Controller System from Bachmann Trains. For Ages 8 and Older. Features: * For use with DC-operated trains in N, HO and On30 scale. * Plug-in wiring. * Power indicator light. * Direction control switch. * Electronic circuit protection. * Convenient E-Z Track track power wire. * Universal track power wire for other track systems. * Output to track: .7 amps. * Includes detailed instruction manual.
...more about the Bachmann Power Pck w/Spd Cntrlr N/HO/On30
|
This is the Bachmann® Power Pack & Speed Controller System. Suitable for Ages 8 & Older. Features: * Designed for use with large scale DC-operated trains. * Plug-in wiring. * Power indicator light. * Direction control switch. * Electronic circuit protection. * Convenient Bachmann® track power wire. * Universal track power wire for other track systems.
...more about the Bachmann Power Pack w/Speed Controller Large Scale
|
This is the E-Z Command® Digital Command Control System by Bachmann®. Suitable for Ages 8 & Older. Features: * Bachmann® incorporates the latest Bernd Lenz digital technology into this easy-to-use DCC system. * Allows you to digitally control speed, lighting, and direction of multiple locomotives in N, HO, & On30 scale from any manufacturer. * The programming process is simplified with one-button, main-track programming. * 28/128 speed steps for smooth operation. * Plug-and-play compatibility with all DC and DCC systems. * Plug-in wiring. * 1 amp AC wall pack power supply. * Both printed and DVD instructions.
...more about the Bachmann E-Z Command DCC Controller System
|
|
|
|
This is the E-Z Command® Walk-Around Companion by Bachmann®. Suitable for Ages 8 & Older. Features: * Simultaneous throttle control of several locomotives for primary and secondary user operation. * Duplicates locomotive addresses set on E-Z Command® Control Center. * Controls first 4 primary light and sound functions. * Has 2 I/O ports so that a second Companion can be added Category 5 coiled connector wire easily connects to the E-Z Command® Control Center. * Can be used in conjunction with Walk-Around Connector Panels (BACU4408) to establish control points virtually anywhere on the perimeter of your layout. * Detailed instructions.
...more about the Bachmann E-Z Command Walk Around w/Connector Wires
|
This is the E-Z Command® Walk-Around Companion Connector Panel by Bachmann®. Suitable for Ages 8 & Older. Features: * Used in conjuction with the Bachmann® E-Z Command® Walk-Around Companion (BACU4407). * Multiple connector panels let you establish a series of control points virtually anywhere on the perimeter of your layout. * LED power indicator. * Plug-in ports. * Oversee railroad operations from convenient locations throughout your layout. * Simple connections to all brands of track. * Installation template and instructions included.
...more about the Bachmann E-Z Command Walk Around Panel Connector w/Connect
|
This is the Bachmann® E-Z Command® 5 Amp Power Booster. Suitable for Ages 8 & Older. Features: * Intended for indoor use only. * Provides extra current to the track so an increased number of DCC locomotives can run on your HO, N, O, or Large Scale layout. * Output voltage can be adjusted to meet your scale requirements. * Can be used with any NMRA/NEM-conformant DCC system. * Air vents and a fan to ensure proper ventilation and prevent overheating. * SAFETY FEATURES include: * Thermal overload protection * Opto-isolation (current) interface that consumes 30ma. * This eliminates any possiblility for hidden ground loops thru your power station * 7V signal on the DCC bus to pr
...more about the Bachmann E-Z Command Power Booster 5 Amp
|
This is the E-Z Command® 5 Amp DCC Automatic Reverse Loop Module by Bachmann®. Suitable for Ages 8 & Older. Features: * Designed for use with the Bachmann® E-Z Command® System (BACU4402). * Automatically switches polarity to allow reverse loop travel. * Adjustable amp sensitivity for use with OO/HO/On30, N gauge, and Large scale. * LED power indicator. * Gapped rails required for operation (2 x BACU4597 or an equivalent may be used). * Detailed instructions.
...more about the Bachmann E-Z Command Automatic Reversing Loop Module
|
This is an E-Z Command® Decoder with Wire Harness by Bachmann®. Suitable for Ages 8 & Older. Features: * E-Z Command® basic 1 amp locomotive decoder. * Wire harness for hard-wiring. * Compatible with NMRA-compliant DCC systems. * Programming on the main. * Service mode decoder lock for changing the address on the layout. * Control speed, direction and lighting functions (including dimming). * Ops mode programming. * 28/128 speed steps. * 2- ro 4-digit addressing. * Advanced consisting. * Acceleration, deceleration, and start voltage adjustment. * Operation on standard DC systems (analog operation) possible, and is a feature that can be disabled. * Detailed instructions.
...more about the Bachmann E-Z Cmnd Dcder w/Wire Harness (1)
|
These are E-Z Command® Decoders with Wire Harness by Bachmann®. Suitable for Ages 8 & Older. Features: * E-Z Command® basic 1 amp locomotive decoders. * Wire harness for hard-wiring. * Compatible with NMRA-compliant DCC systems. * Programming on the main. * Service mode decoder lock for changing the address on the layout. * Control speed, direction and lighting functions (including dimming). * Ops mode programming. * 28/128 speed steps. * 2- ro 4-digit addressing. * Advanced consisting. * Acceleration, deceleration, and start voltage adjustment. * Operation on standard DC systems (analog operation) possible, and is a feature that can be disabled. * Detailed instructions.
...more about the Bachmann E-Z Command Decoder w/Wire Harness (3)
|
This is an E-Z Command® Decoder with NMRA 8 Pin Plug by Bachmann®. Suitable for Ages 8 & Older. Features: * E-Z Command® basic 1 amp locomotive decoder. * NMRA 8 pin plug wiring configuration for DCC-ready locomotives. * Compatible with NMRA-compliant DCC systems. * Programming on the main. * Service mode decoder lock for changing the address on the layout. * Control speed, direction and lighting functions (including dimming). * Ops mode programming. * 28/128 speed steps. * 2- ro 4-digit addressing. * Advanced consisting. * Acceleration, deceleration, and start voltage adjustment. * Operation on standard DC systems (analog operation) possible, and is a feature that can be d
...more about the Bachmann E-Z Command Decoder w/NMRA Plug (1)
|
This is a DC Train Power Controller from Aristo-Craft Trains. It's for experiended collectors and must be used with an external DC power supply. Features: * 10 amp capacity. * Built-in cooling fan. * Consistant voltage pulse width speed control. * Directional control. * Automatic electronic circuit protection. * Power and overload indicator lights. * Automatic electronic momentum circuit for smooth operation. * Fixed DC taps for DC accessories. * For use with any indoor-outdoor model railroads using DC track power.
...more about the Crest Control Pack Adapter 10 Amp
|
This is Crest's 10-Channel Train Engineer Walk-Around Control System for Use with Any Gauge Indoor/Outdoor Model Railroads Using DC Track Power. Features: * This is a two-piece wireless radio control system. * Designed to operate any DC powered model train without any modification to either the existing power supplies or locomotives,. * regardless of scale. * Designed for easy operation. Testing has shown that a 300 foot operating range is possible between transmitter and receiver. * No "line of sight" is necessary between the transmitter and receiver. * There are 10 frequencies, as well as 10 different track addresses (channels) available for use per frequency. * Each freq
...more about the Crest The Train Engineer Wireless Control System
|
This is a Basic Train Engineer Walk-Around Control System from Aristo-Craft. It's for experienced collectors. Features: * 2-piece set consists of the transmitter (TX) and the receiver (RX). * Allows operation of any DC powered model railroad train as a "wireless walk-around" control system without any modifications to. * existing power supplies or locomotives. * Fully compatible with any gauge and scale of DC model train. * Can be used with almost any DC power pack of 2.5 amp or less. * Easy installation and operation - only 4 wires need to be connected. * Operational distances of "100" are possible between transmitter and receiver and no "line of sight" is required. * Set
...more about the Crest Basic Train Engineer Wireless Walk Around
|
This is an HO Scale Deluxe Power Pack from Model Power. Features: * For use with all trains and racecar sets that require controllable 12 volt direct current. * Includes AC tap off/heavy duty transformer. * UL approved and circuit breaker protected. * Sturdy black plastic construction. * Forward and reverse switch. * Red lever that goes from STOP (0) to FAST (100) in increments of 20.
...more about the Model Power Deluxe Power Pack HO
|
This is the MRC BlackBox Suitable for Ages 16 & Older. Features: * This is the handheld, revolutionary accessory for all dual-mode, sound decoder equipped locomotives that use standard DC power packs! No DCC system required! Designed for HO (15-16V) and N (10-12V) scale. * Simple 4-wire hook-up: 2 wires to the DC powerpack's variable output 2 wires to the track Can be used in a layout with block control (cabA/cab B) as one of the cabs so you can run sound locos on one cab, and normal DCC locos on the other. * Detailed instructions.
...more about the MRC MRC BlackBox DC Sound Control
|
This is the Throttlepack AC 80W from MRC. Suitable for Ages 14 & Up. Features: Compatible with just about every AC powered model locomotive and their sounds Special sine-wave output circuitry provides plenty of controlled power Separate, UL Listed power supply keeps the THROTTLEPACK AC footprint small Whistle/horn & bell buttons included Special "Booster" button for added power when needed Precise, slow-speed throttle control for realistic performance Direction button.
...more about the MRC Throttlepack AC 80W
|
