Hobbylinc Home
Search:
Help Hobbylinc.com Home Page Shopping Cart
G64-10W Reload Kit 29/40-120
Other items from Aerotech

This Model Rocket Motor Reload Kit Includes One G-class G64-10W Reloadable Motor Systems for RMS 29/40-120 Motor Hardware, Designed by Aerotech. Federal Law Prohibits the Sale of This Product to Persons Under Age 18.

Your Price:$9.28
Savings:33% off
List Price:$13.99
Product Number:aro76410
Usually ships out in 24 hours
Usually ships out in 24 hours
OR
Add to Wish List
Features
  • For use in RMS 29mm E, F, G motor.
  • Primary use in single stage rockets.
  • They deliver power at the lowest per flight cost available in hobby rocketry.
  • White Lightning looks and sounds like actual sounding rockets and launch vehicles.
  • White Lightning propellant formulation: a brilliant white flame, dense bright white exhaust, and a throaty roar.
  • Easy to track and exciting to watch!
  • The average thrust of the motor is 14.4 pounds (64 Newtons).
  • Time delay of 10 seconds between propellant burnout and the firing of the ejection charge.
  • Uses the exclusive Copperhead single lead igniter.
  • Ignites by electrical means only.
  • Certified by the National Association of Rocketry.
  • This reload kit includes (1 of each)
  • -Liner (1" O.D. tube)
  • -Propellant Grain (long slotted part)
  • -Grain Adapter (7/8" O.D. tube)
  • -Delay Grain (short solid part)
  • -Delay Spacer (9/16" O.D. Washer or tube)
  • -Delay Insulator (5/8" O.D. tube)
  • -Delay O-Ring (5/8" O.D. x 3/32" thick)
  • -Forward Insulator (1" O.D. washer)
  • -Aft O-Ring (1/16" thick x 1" O.D.).
  • -Forward O-Ring (1/16" thick x 1" O.D.)
  • -Nozzle (black plastic part).
  • -Copperhead Igniter
  • -Ejection Charge Container/Nozzle Cap (Red)
  • Assembly and operation instructions provided.
  • Product warranty policies included.
Includes

One G64-10W Reloadable Motor Systems

Specifications
  • Motor Diameter: 1.13" (29mm)
  • Assembled Weight: 5.3oz (151g)
  • Maximum Liftoff Weight: 17oz (482g)
  • Total Impulse: 120 Newtons
Others Also Ordered
Requires
  • RMS 29/40-120 Motor(s)
  • 12V Launch System
  • Wet Wipes or Damp Paper Towel
  • Hobby Knife (tes50627c) or Scissors
  • Assembly
Click a link to the left to view products here...
Comments
  • This reload kit is only for use in Aerotech's RMS-29/40-120 motor.
  • Read and follow the safety codes of the National Association of Rocketry (NAR) and the Tripoli Rocketry Association and comply with all federal, state and local laws in all activities with hobby rockets.
  • Damaged or defective reloads should be returned to Aerotech.
Home      |      Help      |      Order Status      |      Site Map
Copyright ©1995-2009 HobbyLinc. All rights reserved. Images and Descriptions are representative only, actual items may vary. Prices subject to change without notice.
index