• Chassis: Aluminum plates with composite plastic skid plate, chassi has multiple upper link adjustment holes for suspension tuning an anti-squat adjustments, removable electronics tray and multipl ESC mounting plates, streamlined skid plate for less hangups ove rough terrain.
• Drive: Four wheel with oversize 12.5mm steel universals, plasti lightweight axles with 16mm narrower rear axle to squeeze throug tight gate layouts, low profile axle housing for maximum groun clearance.
• Ball Bearings: Full set.
• Pinion Gears: 14 tooth 48 pitch, 12-19 tooth pinion gears can be use for gear ratios from 44.2:1 through 27.9:1.
• Gearboxes: Compact profile with ball bearing equipped sintered meta drivetrain.
• Differentials: Locked (spool).
• Body: Clear Axial Hardline, meets all U.S.R.C.C.A. requirements adjustablebody mounts for different body angles and heights.
• Wheels: Axial 2.2 competition beadlocks with narrow offset fo greater steering response, also includes CNC orange anodized rings.
• Steering: Behind the Axle (BTA) design, enclosed steering slid with 8° kingpin angle for decreased scrub radius and tighter turns front steering axle can rotate the motor up or down.
• Suspension: 4-link double triangulated with composite plastic uppe links and oversize rod ends with 7mm aluminum links and replaceabl composite plastic sleeves.
• Shocks: 72-103mm aluminum bodies, 10mm Delrin pistons with adjustabl upper mounts for fine tuning ride height.
• Caster: Adjustable in 15° increments, caster/toe-in refers to th angle of the front suspension when viewed from the side of the ca in relation to the chassis.
• Camber: Adjustable, camber refers to the angle of the tops of th tires from vertical when viewed from front or behind vehicle.
• Warranty: Your Axial product is warranted to be free from defect in materials and workmanship when new. This warranty does not cove damages due to normal wear and tear, user's failure to perfor routine maintenance, user error of assembly or installation, use modifications or addition of aftermarket parts or option parts..

• Vehicle,
• Width: Front wheel to wheel outside: 10.2" (260mm)
• Rear wheel to wheel outside: 9.5" (241mm)
• Wheelbase: 12.5" (317.5mm) max
• Height: 5.25 - 6.75" (133 - 172mm)
• Ground Clearance: 1.75 - 3.40" (44.5 - 86.5mm)
• Gear Ratio: 37.9:1 with included 14T pinion
• Body,
• Length: 12.75" (324mm)
• Width: 5.25" (134mm)
• Height: 3.5" (89mm)
• Axial Product Number: AX90017

XR10 Competition Rock Crawler with wheels, beadlocks, clear body, instruction manual and decals

• For Replacement Ball Bearings use Qty. Siz Location.
• Qty. Bearing Se 4 5x8x2.5mm flanged Gear Shaft.
• 2 DTXC152 4 5x8m Gear Shaft.
• 2 DTXC152 2 5x8x2.5mm flanged Stepped Gear 1 DTXC152 3 5x8m Gearbo 2 DTXC152 2 15x21m Final Gear.
• 1 AXIC124 2 5x11m Steering Knuckles 1 DTXC154 2 10x15m Steering Knuckles 1 DTXC1595.