This is the Castle Creations Phoenix-25 amp Brushless Sensorless ESC. This speed control is specifically designed for Brushless application. NOT to be used with Brushed motors. Doing so will ruin ESC. Product Features
- Extremely low resistance (.013 Ohm).
- High rate (11kHz) switching.
- Up to 25A continuous current with proper air flow, 35A surge.
- Five to eight cells with four micro servos.
- Up to ten cells with three micro servos.
- 16 cells max with BEC disabled.
- Dynamic braking ensures folding props fold properly.
- BEC (1.5A) provides power to receiver and servos-eliminates need fo a separate receiver battery.
- User programmable features Low voltage cutof Over-current protectio Brake typ Throttle rang Timing advanc Cutoff typ Soft start Ramp Up Runs motor in forward or reverse Auto motor in cutoff with reset Safe Power ON arming program ensures motor won't accidentally turn ON Low torque soft start prevents damage to fragile gearboxes Auto Shut Down when signal is lost or radio interference become severe.
Product Specifications
- Length: 1.5" (37mm)
- Width: 1" (25.4mm)
- Height: 3/16" thick (5mm)
- Wire Length: 4" (102mm) motor ends 5.5" (140mm) battery end
- 7" (178mm) servo wire with Universal connecter
What's Included
- Instruction sheets
- Phoenix 25 ESC
Required
- Soldering to motor and connector
- Soldering iron HCAR0775
- Solder
- Battery connector (specific to customer's connectors)
|
Click a link to the left to view products here... |
Product Rankings Manufacturer Comments Be sure to have correct polarity, incorrect polarity can damage the speed control unit.
|
Also Viewed
Brushless ESC w/BEC 2-3S LiPo
$31.79 [ 42% off ]
25 Amp Electronic Speed Control Skyfly Max RTF
$33.99 [ 15% off ]
Control Horn Nylon 1/2A (2)
$0.69 [ 34% off ]
|
|
|
|
;postJson('/cgi-bin/a4.cgi','aform');)
