This Is Dremel's 1/8" Stainless Steel Brush Accessory Bit. Product Features
- An end-shaped brush with stainless steel wire bristles.
- Stainless steel brushes do not cause "after-rust" when used on corrosive-resistant materials like pewter, aluminum, and stainless
- steel.
- Ideal for cleaning, deburring, and surface-finishing items made from stainless steel, aluminum, silver, pewter or other white metals.
- Very effective in hard-to-reach places, such as slots.
Product Specifications
- Brush Diameter: 1/8" (3,2mm)
- Shank Diameter: 1/8" (3,2mm)
- Max. Operating Speed: 15,000/min
- Dremel Product Number: 532
What's Included One Stainless Steel Brush Bit Required
- Rotary Tool
- Eye Protection
|
Click a link to the left to view products here... |
Product Rankings Manufacturer Comments - Do not use stainless steel brushes in areas where carbon steel particles may come in contact with the brush (such as steel work-
- benches). This prevents rust and contamination.
- Always store stainless steel brushes apart from carbon steel brushes.
|
Also Viewed
Stainless Steel Brush Wheel
$2.79 [ 28% off ]
Clean/Polish Wire Brush 1/2
$2.09 [ 29% off ]
Stainless Steel Brush Cup
$2.59 [ 33% off ]
Clean/Polish Wire Brush 1/8
$2.09 [ 29% off ]
Brass Brush Cup
$2.79 [ 28% off ]
Spiral Cutting Bit
$3.19 [ 27% off ]
Brass Brush End
$2.79 [ 28% off ]
Aluminum Oxide Abrasive Wheel
$4.59 [ 28% off ]
Brass Brush Wheel
$2.79 [ 28% off ]
Clean/Polish Brush Bristle
$2.09 [ 29% off ]
Cut-Off Wheel 1-1/4 (5)
$3.19 [ 27% off ]
Clean/Polish Brush Bristle
$2.09 [ 29% off ]
Clean/Polish Wire Brush 3/4
$2.09 [ 29% off ]
Tungsten Carbide Cutter
$7.79 [ 29% off ]
Folding Wing Glider Deal (1-1/2dz) (D)
$71.67 [ 20% off ]
Spiral Cutting Guide Kit
$19.51 [ 6% off ]
Razor Saw Set
$9.49 [ 29% off ]
Polishing Compound
$2.19 [ 27% off ]
Hi-Flier Model Rocket Kit
$6.39 [ 32% off ]
Carbon Brush Type 3/4/5
$3.22 [ 25% off ]
|
|
Also Bought
Stainless Steel Brush Cup
$2.59 [ 33% off ]
Stainless Steel Brush Wheel
$2.79 [ 28% off ]
Brass Brush Cup
$2.79 [ 28% off ]
Brass Brush End
$2.79 [ 28% off ]
Clean/Polish Brush Bristle
$2.09 [ 29% off ]
Clean/Polish Brush Bristle
$2.09 [ 29% off ]
Clean/Polish Wire Brush 1/8
$2.09 [ 29% off ]
Spiral Cutting Bit
$3.19 [ 27% off ]
Brass Brush Wheel
$2.79 [ 28% off ]
Rubber Polishing Cylinder Point 1/4
$2.09 [ 29% off ]
Tubing Cutter
$4.59 [ 29% off ]
Square Aluminum Tube 1/8x1/8 (6)
$6.79 [ 28% off ]
Engraving Cutter
$1.99 [ 32% off ]
Chuck Collet 1/16
$2.09 [ 29% off ]
Chamfer Router Bit 45 Degrees
$7.29 [ 28% off ]
Drum Sander-Coarse 1/4
$2.89 [ 27% off ]
Polishing Cone/Tip 3/8 Felt
$2.19 [ 27% off ]
48'' Shock Cord Nylon 1/8''
$0.69 [ 30% off ]
Fine Drill Set
$11.69 [ 29% off ]
Sanding Disc Fine (36)
$2.39 [ 27% off ]
|
|
;postJson('/cgi-bin/a4.cgi','aform');)
