1/18 MINI QUAKE RTR

This is the 1/18 scale Electric Powered, Radio Controlled, 4-Wheel Drive Duratrax Mini Quake Off-Road Ready-to-Run Monster Truck.

Chassis: Composite tub style with countersunk screws
Drive: Four wheel shaft drive
Motor: 380 size motor (DTXC3307)
Radio: 2-channel AM pistol grip made by Futaba with steering and throttle trim, adjustable steering rate, charge jack for optional NiCd batteries, battery LED and one SX100 servo for steering
Ball bearings: Full set included, 14 total
Shocks: Eight oil filled with black composite bodies
Gearbox: Sealed front and rear
Tires: 2.60" (65mm) diameter, 1.4" (36mm) wide rubber
Wheels: Five spoke white plastic construction
Speed Control: High-Frequency ESC5000 Electronic Speed Control with forward and reverse (no brake) Micro RS4/Mini-T style connector (DTXM1260)
Bumpers: Front and rear black plastic with skidplates
Suspension: Fully independent
Camber Tie Rods: Fixed
Steering Tie Rods: Fixed non-adjustable,
Servo Saver: None
Six cell 600mAh NiCd battery pack (DTXC2196)
200 mAh wall charger (DTXP4080)
Warranty Period: 90 days except for parts covered by the Stress-Tech
Guarantee. Stress-Tech parts have a one year warranty

Duratrax Mini Quake with eight oil-filled shocks, 380 motor, electronic speed control, painted body, tires, wheels, 6-cell 600mAh, NiCd made with AE size cells, 16 tooth pinion gear, 46 spur gear, decals, 2-channel radio, eight AA batteries, 200mAh wall charger, decals and instruction manual.

Manufacturer:	Dura Trax
Product #:	dtxdtxd11
Your Price:	$216.79
List Price:	$299.99
Availability:	In Stock

VEHICLE-
Length: 9.5" (240mm)
Width: 7.4" (185mm)
Height: 4.7" (120mm)
Weight: 25 oz (725g) approx.
Wheelbase: 6.5" (166mm)
Tread: Front-5.6" (143mm) Rear-5-5/8" (143mm)
Front Track: 7.2" (182mm)
Rear Track: 7.2" (182mm)
Ground Clearance: 1.5" (32mm)
BODY-
Length: 8.8" (223mm)
Width: 3" (70mm)
Height: 2.25" (55mm)

Installation of the 8 AA batteries in the transmitter, charging the included battery pack with included wall charger for three hours.

For Replacement Ball Bearings use: All 14 bearings in this model are 6x10mm. Use stock number DTXC1561 if you need replacement bearings.
The setup procedure for the ESC5000 is the same as the 1000 and 2000.