• Charges 4-8 cell NiCd or NiMH (4.8 - 9.6V) cells with a capacit range of 750-7500mAh.
• NiCd and NiMH compatibility with custom peak detection.
• Pushbutton controls, audible tones and a custom LED with backligh for easy setup and use.
• Selectable charge currents of 800mA, 1.5A, 3A and 5A.
• Automatic TRICKLE charge fills pack completely after peak charge fo optimum battery performance.
• Precise peak detection algorithm with automatic TRICKLE charge fill packs completely for optimum voltage and run time.
• Built-in jack included for charging 4 or 5 cell NiCd or NiM receiver batteries for nitro models and even transmitter batteries.
• LCD shows battery voltage, charge current, time, capacity, batter type and more.
• Small, lightweight switching AC power supply delivers up to 5 amp of charge current.
• Solid state reverse polarity and current overload safety devices.
• FIVE YEAR warranty (U.S.A. and Canada only).

• AC Input: 110V AC 60Hz
• DC Input: 11-15V DC, built-in lead with alligator clips
• Battery Types: 4-8 NiCd or NiMH cells (4.8-9.6V)
• Battery Capacity Range: 750-7500mAh
• Fast Charge Current: 0.8A, 1.5A, 3A, 5A linear (40W)
• Fast Charge Termination: Peak detection
• Fast Charge Safety Timer: 90 minutes
• Peak Sensitivity: 8mV for NiCd, 4mV for NiMH
• Auto TRICKLE Current: 1/20 fast charge setting
• Input Control: 3-pushbuttons
• Display Type: 7-segment custom LCD with backlight
• Audible Tones: Indicate start, stop, errors
• *Output Connections: Built-in lead with Kyosho type connector
• Built-in jack for charging 4 or 5 cell Rx or Tx packs
• *Standard to Deans Ultra Male Adapter available separately (gpmgpmm3131)
• *Standard to Vendetta, MiniQuake, RS4 Battery available separately (dtxc2210)
• Protective Devices: Solid-state reverse polarity and current overload
• Case size: 5.75 x 5.25 x 1.81" (146 x 133 x 46mm)
• Weight: 19.2oz (543g)
• Dura-Trax Product Number: DTXP4210

DuraTrax Onyx 210 AC/DC Sport Peak Charger

For batteries using a Traxxas type connector, order the TRAC306 adapter..