• Charges 4-8 cell NiCd or NiMH (4.8 - 9.6V) cells.
• Two independent outputs each with identical features and functions.
• Selectable charge currents of 800mA, 1.5A, 3A and 5A with auto TRICKLE-each output.
• NiCd and NiMH compatibility with custom peak detections-each output.
• Unique built-in jack for charging 4 - 5 cell receiver packs for nitr models, even Tx packs-each output.
• Custom LCD with Blue backlight shows battery voltage, charge curren time and capacity-one for each output.
• Simple pushbutton controls and audible tones aid in setup and use each output.
• DC power lead with alligator clips easily connects to many 12V D power sources.
• Solid state reverse polarity and current overload protection ensur trouble-free operation.
• FIVE YEAR warranty (U.S.A. and Canada only).

• AC Input: 110V AC 60Hz
• DC Input: 11-15V DC, built-in lead with alligator clips
• Battery Capacity Range: 750-7500mAh
• Fast Charge Current: 0.8A, 1.5A, 3A, 5A linear (40W)
• Fast Charge Termination: Peak detection
• Fast Charge Safety Timer: 90 minutes
• Peak Sensitivity: 8mV for NiCd, 4mV for NiMH
• Auto TRICKLE Current: 1/20 fast chg setting, rounded to 50mA (0-250mA)
• Controls: 3-pushbuttons
• Display Type: 7 segment custom LCD with blue backlight
• *Output Connections: Two built-in leads with Kyosho type connectors
• Built-in jack for 4-5 cell Rx packs or Tx packs
• *Adapter-Standard to Deans Ultra Male (available separately) (gpmgpmm3131)
• *Adapter- Standard to Vendetta, MiniQuake, RS4 Battery available separately (dtxc2210)
• Protective Devices: Solid-state reverse polarity and current overload
• Case size: 7.95 x 6 x 1.97" (202 x 153 x 50mm)
• Weight: 27.8oz (789g)
• Dura-Trax Product Number: DTXP4240

DuraTrax Onyx 240 AC/DC Dual Charger with two output leads with standard connectors, AC cord, DC cord with alligator clips and instruction manual

For batteries using a Traxxas type connector, order the TRAC306 adapter..