- Made especially for use over Floquil Enamel paints to give a smooth gloss finish, ideal surface for applying decals to the models.
- Permanent on all surfaces and safe for most plastics.
- Dries to touch in 2 to 5 minutes and requires no baking or curing.
 |    |
 | Hi-Gloss 1 oz Other items from Floquil This is a 1 oz glass bottle of Enamel Hi-Gloss Paint.
| ||||||||||||
Features Includes One glass bottle of Enamel Hi-Gloss Paint | Specifications Amount: 1 fluid ounce (29.6ml) |
Others Also Ordered
Requires
- For application, use an airbrush or paint brush.
- Floquil Dio-Sol thinner/brush cleaner for clean up.
- Lung, eye and skin protection (see COMMENTS).
Comments
- Directions: -Stir Well.
- -To apply with brush: Use thin strokes.
- -To apply with airbrush: Thin 75% paint to 25% Floquil
- airbrush thinner.
- -Allow overnight dry time between coatings.
- Contains: Petroleum Distillates. Keep away from heat, sparks and open flame.
- Keep Out Of Reach Of Children.
- Vapor Harmful. Causes eye and skin irritation. To avoid breathing vapors and spray mist, open windows and doors to ensure fresh air
- entry during application and drying. If you experience eye
- watering, headaches or dizziness, increase fresh air entry or wear
- respiratory protection. Use only with adequate ventilation.
- Close container after each use.
- Danger: Can be harmful or fatal if swallowed.
- First Aid: If swallowed Do NOT Induce Vomiting. Call Physician Immediately.