.35 C/L Ceramic Engine

This is the Fox .35 cu in (5.7cc) Control Line Ceramic Cylinder Engine.

Fox .35 C/L Ceramic Engine
$126.69
DISCONTINUED
 
Retail $225.00  SAVE 44% !
Fox Manufacturing Co. Item # fox35016
Features :
  • Ceramic plated aluminum cylinder adds up to 20% more RPM substantially reduces wear on piston and sleeve and reduce cylinder weight by 35%.
  • Suited for control line stunt models up to 44 oz (1247g) in weigh and wing spans from 36" - 52" (914mm - 1321mm) and also profil models such as the Ringmaster and Flight-Streak type.
  • Single needle control line carburetor.
Out of Stock
Discontinued - No longer available for purchase
Website security verified by GoDaddy.

You Might Also Like

← Swipe To View More →

Features

  • Ceramic plated aluminum cylinder adds up to 20% more RPM substantially reduces wear on piston and sleeve and reduce cylinder weight by 35%.
  • Suited for control line stunt models up to 44 oz (1247g) in weigh and wing spans from 36" - 52" (914mm - 1321mm) and also profil models such as the Ringmaster and Flight-Streak type.
  • Single needle control line carburetor.

Specs

  • Displacement: .35 cu in (5.7cc)
  • Bore: .800
  • Stroke: .700
  • RPM: 9600 with 10x6 propeller
  • Weight: 7.9oz (225g) with muffler
  • Needle Setting: 5-7 turns out with hole in spraybar pointing down
  • Distance Between Mounting Hole Centers Same Side: 0.63" (16mm)
  • Distance Between Mounting Holes Centers Opposite Side: 1.5" (37.5mm)
  • Height Bottom of Mounting Tab/top of Cylinder Head: 2.4" (62mm)
  • Height from Crankcase Bottom to top of Cylinder Head: 3" (76.5mm)
  • Width at Mounting Tabs: 1.8" (46mm)
  • Distance from Backplate to Front Bearing: 2" (51mm)
  • Distance from Backplate to end of Crankshaft: 3.1" (79mm)
  • Distance Between Muffler Mounting Holes: 1.4" (35mm)
  • Fox Product Number: 35016

Includes

Fox .35 cu in (5.7cc) Control Line Ceramic Cylinder Engine with glow plug, muffler with pressure tap


Requirements & Suggestions

  • Fuel: Control line formula, 29% castor oil, 5% nitromethane and 66% methanol (manufacturer recommends Fox Superfuel, not carried-engine will not run properly and usable life may be reduced by using most commercial R/C fuels on the market)
  • Glow starter, plug wrench and field equipment
← Swipe To View More →

Reviews