• Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shift very quickly virtually eliminating signal conficts an interruptions unlike other 2.4GHz systems that only stay on on or two frequencies.
• New features are the 4-wheel steering mixing for better roc crawling capabilities, plus new Updating program.
• Grip features a built-in vibrator that can be used as a lap timer up timer, navigation aid or as a low-voltage alert.
• Pre-Vision Packet Screening technology scans incoming data fo potential problems and applies sophisticated error correctio techniques for solid impenetrable link with model.
• Easy Link system features a unique ID code in the transmitter tha links to the receiver insuring that receiver only follows command from this transmitter-with over 134 million possible codes there i no chance for a conflict.
• High voltage receiver (3.7 - 7.4V) for use with a wide range o NiCd, NiMH and LiPo packs.
• Normal/High Speed mode auto detection.
• "New Driver" "Race Ready" "Expert" and "Big Car" menus that ad functions based on skill level and experience.
• Throttle Mode Select for selecting acceleration/brake servo neutra points between 70/30 for nitro or 50/50 for electrics, throttl programming options including 5-point curve, expo and VTR.
• Slide the power switch to "display" to set up without transmitting view up to 36 functions at once and use one of the four menu provided or create a custom menu, optimize response for analog o digital/brushless servos, set up two sets of dual rates, choos two Condition Select functions, restore factory settings with th adjuster function, or adapt electronic speed control to HRS fram rates with MC link.
• Traction control/acceleration rate.
• Custom menu assignments.
• Data transfer.
• ABS braking.
• Boat mixing-in addition to great performance in R/C car and truc applications, this system is also ideally suited to the rigors o boat racing.
• Direct Select single button acccess to eight preassigned functions.
• Forty model memory with ten character model naming.
• Fourth channel for 4WS crawlers, transponders, brake bias and more.
• VTR, acceleration, speed, expo, mode, tension and 5-point curv (throttle).
• Two programmable mixes.
• Electronic and mechanical ATL (brake side only).
• Condition select 2.
• Programmable battery fail safe.
• Start function/engine cut.
• Right/Left hand use.
• Channel 1-4 fail safes.
• Assignable buttons and dials.
• Digital trims memory and reset.
• Navigation lap timer that sounds when target lap time is exceeded up, down lap and systems timers.
• One year limited warranty through manufacturer beginning at date o purchase.

• Transmitter-
• Power Requirement: NT5F1700B NiMH 6V battery (included) OR
• 4 AA batteries
• Current Drain: 250mA or less (vibration and back lighting off)
• Battery Charger-
• Input: 120V AC, 60Hz 5W
• Output: TX 6 VDC 170mA
• RX 6 VDC 100mA
• Receiver-
• Size: 1.38 x 0.91 x 0.33" (35.1 x 23.2 x 8.5mm)
• Weight: 0.28oz (7.8g)
• Operating Voltage: 3.5 - 8.4V
• Current Drain: 135mA or less

• 4PKS Pistol Grip Transmitter
• R614FS Receiver, FUTL7635
• HT5F1700B 1700mAh 6V Transmitter Battery
• HBC-3B(4) 120V AC Battery Charger (futfutm1832)
• Switch Harness
• Wheel Adapter
• Small Screwdriver
• Manual

If wanting a LiFe battery for the transmitter, the Hobbico LiFe 6.6 1900mAh 2 Cell Battery Pack (hcahcam6520) is an ideal choice..