This is the Futaba 6EX Heli Transmitter with the 2.4GHz FASST system, R617FS 6-ch Receiver and four S3001 Ball Bearing Servos. Product Features
- Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shift very quickly virtually eliminating signal conficts an interruptions unlike other 2.4GHz systems that only stay on on or two frequencies.
- R617FS high sensitivity receiver weighs only 0.25oz (7g) without cas yet is a full range system for all aircraft from giant scale t Park Flyer applications-no need to buy separate receiver fo specific aircraf rubber grommets installed where antennas exit to eliminate stres and fraying of the wires.
- Dual antenna diversity enables FASST system to automatically an seamlessly select the best reception between the two antenna built into the receiver ensuring that the aircraft stays unde constant control of transmitter regardless of altitude.
- Pre-Vision Packet Screening technology scans incoming data fo potential problems and applies sophisticated error correctio techniques for solid impenetrable link with model.
- Easy Link system features a unique ID code in the transmitter tha links to the receiver insuring that receiver only follows command from this transmitter-with over 134 million possible codes ther is no chance for a conflict.
- No hassle Fail Safe programmed through transmitter-no complicate set-up steps or binding plugs.
- When performing a ground check, the Power Down function allow modeler to reduce power from up to 50+ paces away-like retractin the antenna on a conventional transmitter.
- Purpose built custom IC chips for key functions; no off-the-shelf I chips.
- One year limited warranty.
Product Specifications
- Transmitter;
- Power Supply: 9.6V
- Current Drain: 170mA
What's Included
- Futaba 6EX Transmitter
- NT8F600B 9.6V 600mAh NiCd Transmitter Battery, FUTM1440
- FBC-19B(4) 120V AC Battery Charger, FUTM1830
- Four S3001 Ball Bearing Servos, FUTM0029
- R617FS Receiver, FUTL7627
- Switch Harness-J Style Connector SWH13 FUTM4370
- Neck Strap, FUTM5690
- Servo mounting hardware and extra horns
Required
- 4.8V receiver battery of modeler's choice
|
Click a link to the left to view products here... |
Product Rankings
|
Also Viewed
Optic 6 Sport 2.4GHz Tx/2 Optima 6 Rx
$181.49 [ 43% off ]
Optic Sport 2.4 Micro 4x HS-325BB Optima 6
$188.19 [ 41% off ]
Hexagon Rod .080x10 (10
$4.09 [ 28% off ]
Optic Sport 2.4 Micro 2x HS-55 Optima 6
$188.29 [ 42% off ]
Square Rod .010x10 (10)
$2.69 [ 28% off ]
ElectriFly ES80 Micro Servo Fut J Connector (10)
$99.99 [ 44% off ]
Running Hardware Kit #1258
$25.29 [ 36% off ]
1/32 DS BMW M3
$57.69 [ 17% off ]
Square Rod Styrene .020 (10)
$2.69 [ 28% off ]
Channel Styrene 1/16 (10)
$4.49 [ 28% off ]
Hands Free Magnifier Glasses w/2 LED Lights
$17.69 [ 29% off ]
Wood Truss Bridge Parts -- Deck With Stringers 24'' pkg(2) - O-Scale
$25.20 [ 16% off ]
Rectangle Strip Styrene .020x.060x10 (10)
$2.69 [ 28% off ]
Square Rod Styrene .060 (10)
$2.69 [ 28% off ]
Customizer Mini Launch Set E2X Easy-to-Assemble
$15.99 [ 33% off ]
Half Round Styrene .080x.040x10 (10)
$4.09 [ 28% off ]
Scene-A-Rama Mountain Diorama Kit
$14.59 [ 26% off ]
Round Rod .015x10 (10)
$2.69 [ 28% off ]
Merchant's Row II -- Kit - 10 x 5'' 4 x 12.5cm - HO-Scale
$32.74 [ 16% off ]
Aztek Ultimate Airbrush Set w/Compressor
$191.29 [ 29% off ]
|
|
|
|
;postJson('/cgi-bin/a4.cgi','aform');)
