Narrow-band spacing and Dual Conversion signal filtering combine t provide exceptionally clear, interference-free reception an amazingly smooth, accurate control..

• Narrow Band: 20KHz
• Intermediate Frequency- 1st IF: 10.7MHz
• 2nd IF: 455kHz
• Power Requirements: 4.8 to 6.0V (shared with servos)
• Current Drain: 14mA
• Length: 2.19" (55.5mm)
• Width: 1.00" (25.5mm)
• Height: 0.89" (22.5mm)
• Weight: 1.07oz (30.4g)

One R148DP Micro 8 Channel 72MHz PCM 1024 Receiver

• 1024 Resolution is NOT Compatible with Older PCM 512 Systems..
• For the transmitter/receiver crystal set, use FUTL20**..
• For the High Band, use FUTL0823..
• Special Notice about Frequency Changes-.
• *72MHz- Low band channels 11 to 35; High band channels 36 to 60 Receiver crystal channels (11-35 or 36-60) Within Each Ban Can Be Changed, and Do Not Require a retuning of the receiver..
• *72MHz Frequency Band (Low or High) for the receiver Can Not B Changed from Low to High band, OR from High to Low band withou sending it into Futaba Services for retuning..
• *50MHz, 72MHz, 27MHz and 75MHz Frequency Bands Can Not under an circumstances be interchanged with each other. 72/75:receiver Mus be sent in for retuning to the appropriate band. 50/27: can't do..
• *50MHz, 27MHz and 75MHz receiver crystals Can be changed anywher within the respective bands. There are no High or Low bands suc as the 72MHz band has..
• *Transmitter Crystals Can Not be changed to another channel excep by a licensed service center. It is against FCC regulations, an illegal for the user to change a frequency determining componen of a transmitter. If the radio is not retuned, it can be a hazar spectators, modelers or property, and void AMA insurance coverage..
• *Check with the local R/C club for the frequencies used in your area..