This is a R148DP 8-Ch 72MHz PCM 1024 Dual Conversion Micro Receiver Without Crystal. This is a High Band (channel 36-60) receiver without a crystal (see REQUIRES). Product Features Narrow-band spacing and Dual Conversion signal filtering combine t provide exceptionally clear, interference-free reception an amazingly smooth, accurate control.. Product Specifications
- Futaba Product Number: FUTL0823
What's Included One R148DP Micro 8 Channel 72MHz PCM 1024 Receiver Required
- One FUTL58** Dual Conversion Receiver Crystal
|
Click a link to the left to view products here... |
Manufacturer Comments - 1024 Resolution is NOT Compatible with Older PCM 512 Systems..
- For the transmitter/receiver crystal set, use FUTL20**..
- For the High Band, use FUTL0823..
- Special Notice about Frequency Changes-.
- *72MHz- Low band channels 11 to 35; High band channels 36 to 60 Receiver crystal channels (11-35 or 36-60) Within Each Ban Can Be Changed, and Do Not Require a retuning of the receiver..
- *72MHz Frequency Band (Low or High) for the receiver Can Not B Changed from Low to High band, OR from High to Low band withou sending it into Futaba Services for retuning..
- *50MHz, 72MHz, 27MHz and 75MHz Frequency Bands Can Not under an circumstances be interchanged with each other. 72/75:receiver Mus be sent in for retuning to the appropriate band. 50/27: can't do..
- *50MHz, 27MHz and 75MHz receiver crystals Can be changed anywher within the respective bands. There are no High or Low bands suc as the 72MHz band has..
- *Transmitter Crystals Can Not be changed to another channel excep by a licensed service center. It is against FCC regulations, an illegal for the user to change a frequency determining componen of a transmitter. If the radio is not retuned, it can be a hazar spectators, modelers or property, and void AMA insurance coverage..
- *Check with the local R/C club for the frequencies used in your area..
|
Customer Reviews
4.0 Stars (2 ratings)
or
One-Click-Rating
|
