This is the Futaba R149DP 9-Ch 72MHz PCM 1024 Dual Conversion Receiver. This receiver works with both High and Low band crystals and replaces the older R149DP receivers on separate High and Low bands. Product Features
- Narrow-band spacing and Dual Conversion signal filtering combine t provide exceptionally clear, interference-free reception an amazingly smooth, accurate control.
- One year limited warranty.
Product Specifications
- Narrow Band: 20KHz
- Intermediate Frequency- 1st IF: 10.7MHz
- 2nd IF: 455kHz
- Power Requirements: 4.8 to 6.0V (shared with servos)
- Current Drain: 15mA
- Length: 2.16" (55.0mm)
- Width: 1.28" (32.6mm)
- Height: 0.82" (20.8mm)
- Weight: 1.2oz (34.5g)
What's Included One R149DP 9 Channel 72MHz PCM 1024 Receiver Required
- One Dual Conversion Receiver Crystal depending on channel required;
- Low Band, (ch 11-35) FUTL57**
- High Band, (ch 36-60) FUTL58**
- High Band, (ch 61-90) FUTL59**
|
Click a link to the left to view products here... |
Manufacturer Comments - To Identify as newer R149DP from the older ones, remove the crystal and look at the PCB board that is standing up. If there are no traces and solder (just an empty board) it is the new one..
- 1024 Resolution is NOT Compatible with Older PCM 512 Systems..
- For the transmitter/receiver crystal set, use FUTL20**..
- Special Notice about Frequency Changes-.
- *72MHz- You may change channels within this band..
- *50MHz, 27MHz and 75MHz receiver crystals Can be changed anywher within the respective bands. There are no High or Low bands suc as the 72MHz band has..
- *Transmitter Crystals cannot be changed to another channel excep by a licensed service center. It is against FCC regulations, an illegal for the user to change a frequency determining componen of a transmitter. If the radio is not retuned, it can be a hazar spectators, modelers or property, and void AMA insurance coverage..
- *Check with the local R/C club for the frequencies used in your area..
|
Customer Reviews
4.0 Stars (2 ratings)
or
One-Click-Rating
|
