This is the Futaba GY701 Gyro, Governor and BLS251 Brushless Digital Heli Rudder Servo. Product Features
- GY701 Gyro-.
- Utilizes MEMS (Micro ElectroMechanical System) technology to ensur ultra high-speed processing.
- S.Bus capable, a single cable connection to receiver.
- Internal mixing through S.Bus for no latency or tail offset.
- Sensor has aluminum alloy case and 2-color mode indicator LED.
- 3D and F3C mode selectabl Governor-.
- Organic Light Emitting Display (OLED) 128 x 36 dot graphical displa for easy outdoor viewing in bright sunlight.
- Advanced PID control algorithm and consistent pirouette rate and ya control.
- Mode selectable for governor or rev limiter.
- Easy for anyone to program with both Basic and Expert menus.
- Updatable firmware and software using the CIU-2 PC Interface-no included, order FUTM095 BLS251 Servo (futbls251)-.
- Equipped with a Brushless motor that lasts longer and operates at lower temperature than Brushed motors.
- Samarium Cobalt magnets and dual ball bearings.
- 30% faster response times, smoother operation..
- Same power consumption and centering as Digital servos equipped wit Brushed motors.
- One year limited warranty through Futaba on all components beginnin at date of purchase..
Product Specifications
- Gyro-
- Size: 0.83 x 0.83 x 0.31" (21 x 21 x 8mm)
- Weight: 0.33oz (9.4g)
- Operation Range: +/- 1,200 deg/sec
- Supported Servo Types: Digital 1520µS
- Digital 760µS
- Governor-
- RPM Range: 1,000 - 3,000 RPM
- Length: 1.73" (44mm)
- Width: 1.14" (29mm)
- Height: 0.47" (12mm)
- Weight: 0.459oz (13g)
- Maximum Operating Voltage: 3.8 - 8.4V DC
- Current Drain: 80mA
- Selectable Servo Frame: 70Hz, 280Hz and 570Hz (gyro only) rate
- Flight Mode: User selectable F3C or 3D (gyro)
- Center Pulse Width: 1520µS (70Hz and 280Hz frame rate)
- Control Resolution: 0.1Hz (6RPM) engine speed
- Speed Stability Accuracy: 1%
- Speed Control Range: 1,000 - 3,000 RPM rotor speed
- Operating Temperature: 14° - 113°F (-10° - 45°C)
- Control System: Digital Advanced Control
- Sensor: Vibrating structure gyro/magnetic sensor (gyro/governor)
- Angular Velocity Range: +-1,200° per second
- BLS251 Servo-
- Torque @ 4.8V: 53 oz-in (3.8 kg-cm)
- Speed @ 4.8V: 0.06 sec
- Dimensions: 1.6 x 0.8 x 1.5" (40 x 20 x 36.8mm)
- Weight: 2.1oz (59.5g)
What's Included
- Futaba GY701 Governor with Instruction Manual, three Sensor Mounting
- Stays, Adjustment Screwdriver, Governor Sensor, Red and Black
- Extensions, two Magnets, Sensor, TX and Governor Labels, GY701
- Gyro, BLS251 Servo with Horns and Mounting Hardware
Required
- Installing in heli, connecting to receiver, mounting magnets and sensor and connecting servo linkage
|
Click a link to the left to view products here... |
Product Rankings
|
|
;postJson('/cgi-bin/a4.cgi','aform');)
