• Chassis: Plastic bathtub type 0.079" (2mm) thick.
• Drive: Four wheel shaft.
• Radio: HPI TG-1 27MHz AM pistol grip radio system with SG-1 standar steering servo.
• Electronic Speed Control: EN-1 with reverse.
• Motor: HPI Saturn 35 turn for extended run time with preset mountin positions making gearing changes easier.
• Charger: AC wall type.
• Battery: 7.2V 1500mAh NiCD 6-cell stick pack with Standard connector battery compartment will hold stick or side by side packs.
• Shocks: Composite bodied oil filled.
• Gearboxes: Closed.
• Differentials: Front and rear bevel-type.
• Transmission: Single-speed with steel dogbones.
• Tires: HPI Digger stud type, hard compound for any type of off-roa surface.
• Wheels: White plastic seven spoke, Front 1.2" (30mm) wide, 2.2 (56mm) diameter, Rear 1.4" (35mm) wide, 2.2" (56mm) diameter.
• Spur Gear: 65 tooth plastic.
• Pinion Gear: 24 tooth metal.
• Bumpers: Nylon front.
• Body: Pre-painted polycarbonate with molded nylon wing and preapplie decals.
• Suspension: Nylon double wishbone.
• Caster: Non-adjustable, caster/toe-in refers to the angle of th front suspension when viewed from the side of the car in relatio to the chassis.
• Camber: Non-adjustable, camber refers to the angle of the top of the tires from vertical when viewed from front or behind vehicle.
• Steering: Bell-crank type with servo saver.
• Warranty: Two year limited, valid only in the U.S.A., Canada an South America.

• VEHICLE-
• Length: 15.3" (390mm)
• Width, 9.8" (250mm)
• Height: 4.7" (120mm)
• Weight: 3.4lbs (1545g) including battery and body
• Wheelbase: 10.5" (266mm)
• Gear Ratio: 6.86:1
• Tread: Front- 8.5" (217mm)
• Rear - 8.46" (215mm) center of tires, side to side
• Track: Front- 9.5" (242mm)
• Rear- 9.6" (244mm) outer edges of tires, side to side
• BODY-
• Length: 10.1" (258mm)
• Width: 5.6" (143mm)
• Height: 3.7" (93mm)

HPI Brama 10B Buggy with painted body, 65T spur gear, 24 tooth metal pinion gear, ESC, battery, charger, wheels, tires, motor, 2-ch radio and manual

For Replacement Ball Bearings use Qty. Size Locatio Qty. Bearing Se 2 12x18x4mm Center drive shaft 1 DTXC159 4 5x11x4mm Front Wheel Hubs 2 DTXC154 4 5x11x4mm Rear Wheel Hubs 2 DTXC154 2 12x18x4mm Front Diff Gear 1 DTXC159 2 12x18x4mm Rear Diff Gear 1 DTXC1597.