• Charges NiCd, NiMH Lead Acid and Li-Ion, LiFe and LiPo batteries.
• Optimized operating software regulates current and disconnect circuit if malfunction is detected.
• Individual cell monitoring and balancing.
• Delta peak sensitivity and adjustable charge current for NiCd an NiMH packs.
• Data store and load recalls settings for up to five batteries.
• Balancing lead sockets, JST-XH ports.
• 1-5 cycles of charging>discharge or discharge>charge.
• Processing time limit.
• USB port for PC based analysis of voltage, current, capacity an temperature.
• One year limited warranty through manufacturer beginning at date o purchase.

• Operating Voltage Range: DC 11.0-18.0V
• AC in 100V-240V
• Charge/Discharge Power: Max. 50/5W
• Charge Current Range: 0.1-5.0A
• Discharge Current Range: 0.1-1.0A
• Current Drain for Balancing LiPo: 300mAh/cell
• Battery Cell Count: 1-15 cell NiCd, NIMH
• 1-6S Li-Ion, LiPo
• Pb Battery Voltage: 2-20V
• Dimensions: 5.3 x 5.7 x 1.7" (135 x 145 x 43mm)

Dual Power Battery Charger with AC and DC Power Cords, Output Harness to Male Ultra Connector, Red JST Connector, Glow Charge Lead, Standard Lead, Alligator Clips and Receiver Plug, 2S-6S XH Balance Adapter with Wire Lead Instruction Manual