Aerogloss Jet Black 1 oz
This is a 1 oz glass jar of Gloss Jet Black Colored Aero-Gloss Dope from Midwest. The original hot fuel proof butyrate dope system which gives a durable, fast-drying, lightweight and beautiful lacquer-type finish.
Midwest # mid63-1
$2.69
Retail $3.55 SAVE 24% ! | |
Out of Stock Discontinued - No longer available for purchase |
Website security verified by GoDaddy.
You Might Also Like
← Swipe To View More →
Features
- Used for Tissue Covered Aiplane Models, Control Line Airplane Models, R/C Airplane and Boat Models, Wood Scouting Projects and Model
- Rockets.
- For use on paper, fabric coverings, balsa and basswood.
- Clear dope may be applied over all Aero-Gloss dope colors for added luster.
- Contains no lead.
Specs
- Fluid Ounce: 1 oz (29.5 mL)
- Dope Type: Butyrate
- Fuel Proof: between 20% to 25%
Includes
One 1 oz Glass Jar of Gloss Jet Black Colored Aero-Gloss Dope
Requirements & Suggestions
- Use in a well ventilated area with lung, eye and skin protection.
- Aero-Gloss Thinner for airbrushing and clean-up.
- (If airbrushing, thin 1 part dope with 1 part Aero-Gloss thinner.)
- Prep Primer smooth base coat.
- Sanding Sealer Spray to seal raw wood.
- Balsa Fillercoat Primer to seal grainy wood.
- Aero-Gloss Clear to give paint added luster.
- Aero-Gloss Flat Clear to give paint flat finish.
← Swipe To View More →
Reviews |
Comments
- Flammable: Contains toluol and methyl ethyl keytone.
- As with any type of painting procedure, always test for compatibility of materials on a scrap piece before attempting to paint model.
- For best results: Fill and seal wood with Sanding Sealer, Balsa Fillercoat Primer or Prep Primer. Sand smooth and clean surface.
- Use at 70 to 80 degrees (F), brushing or airbrushing with several
- thin coats instead of one heavy coat. To thin for airbrushing, use
- only Aero-Gloss Thinner. Dries ready-to-handle in 30 minutes;
- recoat in 1 hour for brushing, and any time for spraying.
- Tape free in 30-60 minutes before sanding and 24 hours or overnight before masking with vinyl electrical tape for trim painting. After
- painting trim, dry at least 15 minutes before removing tape.
- Cures to maximum fuel resistance in 3 days under normal drying conditions. Dust free in 5-10 minutes.
- Allow 72 hours dry time if Formula-U is to be applied as a topcoat.
- Tissue Models: Final applications of 1 part dope to 1 part Aero-Gloss thinner provides the smoothest finish.
Others Also Ordererd
← Swipe To View More →