This is a 3.5 oz glass jar of Pactra Balsa Fillercoat Primer from Midwest. The original hot fuel proof butyrate dope system which gives a durable, fast-drying, lightweight and beautiful lacquer-type finish. Product Features
- Used for Tissue Covered Aiplane Models, Control Line Airplane Models, R/C Airplane and Boat Models, Wood Scouting Projects and Model
- Rockets.
- For use on paper, fabric coverings, balsa and basswood.
- Contains no lead.
Product Specifications
- Fluid Ounce: 3.5 oz (103.5 mL)
- Fuel Proof: No, Do Not use as a final coat.
- Midwest Product Number: 70-4
What's Included One 3.5 oz glass jar of Balsa Fillercoat Primer Required
- Use in a well ventilated area with lung, eye and skin protection.
- Brush to apply Balsa Fillercoat to the model.
- Aero-Gloss Thinner (mid43-16) for clean-up.
|
Click a link to the left to view products here... |
Product Rankings Manufacturer Comments - Flammable: Contains toluol and methyl ethyl keytone.
- As with any type of painting procedure, always test for compatibility of materials on a scrap piece before attempting to paint model.
- For best results: 1. Sand entire model until smooth surface is obtained by using progressively coarse to fine sandpaper.
- 2. Fill in any minor surface irregularities with Aero-Gloss Balsa
- Fillercoat Primer. Use Plastic Balsa Wood Putty for larger
- irregularities. Stir Balsa Fillercoat Primer thoroughly. Apply
- with brush. Let dry 24 hours before sanding.
- 3. Fine sand entire model. Lightly wipe off dust with tack rag.
- 4. Lightly wipe entire model with damp sponge to raise wood grain.
- Once dry, fine sand and wipe clean.
- 5. Model surface is now properly prepared for paper or fabric
- covering material, or for surface sealing/priming with Aero-Gloss
- Sanding Sealer if model is to be painted.
|
Also Viewed
Aerogloss Sanding Sealer 1 oz
$4.29 [ 21% off ]
(bulk of 6) Aerogloss Sanding Sealer 3.5 oz
$37.14 [ 22% off ]
Aerogloss Flat Clear 3.5 oz
$6.19 [ 22% off ]
(bulk of 6) Aerogloss Clear 3.5 oz
$34.74 [ 27% off ]
Aerogloss Clear 1 oz
$4.29 [ 21% off ]
Aerogloss Thinner 3.5 oz
$6.19 [ 22% off ]
(bulk of 6) Aerogloss Balsa Fillercoat 1 oz
$25.74 [ 21% off ]
Aerogloss Thinner 1 oz
$4.29 [ 21% off ]
Deluxe Hobby Kit
$26.99 [ 20% off ]
HobbyLite Filler Balsa 8 oz
$4.99 [ 28% off ]
Plastic Cement Tube 5/8 oz
$1.69 [ 19% off ]
INSTA-CURE Gap Filling Cyanoacrylate 1oz
$4.69 [ 21% off ]
Basic Hobby Kit
$6.99 [ 23% off ]
Model Master Hobby Knife
$5.49 [ 28% off ]
T-Pins 1 (100)
$2.59 [ 27% off ]
Model Master Masking Tape
$5.89 [ 28% off ]
40'' Wingspan P38L Kit
$95.74 [ 20% off ]
Enamel Finishing Kit Gloss
$22.99 [ 22% off ]
Intermediate Hobby Kit
$13.99 [ 26% off ]
MAXI-CURE Extra Thick Cyanoacrylate 1/2oz
$3.19 [ 20% off ]
|
|
Also Bought
(bulk of 6) Aerogloss Sanding Sealer 3.5 oz
$37.14 [ 22% off ]
Aerogloss Thinner 3.5 oz
$6.19 [ 22% off ]
Aerogloss Sanding Sealer 1 oz
$4.29 [ 21% off ]
E9-6 Model Rocket Engine (3)
$15.99 [ 33% off ]
B6-4 Model Rocket Engine (3)
$7.19 [ 33% off ]
Cement-Carded 5/8 oz
$1.89 [ 22% off ]
Fin Alignment Guide
$14.69 [ 33% off ]
Camel Hair 5-pc Set
$3.89 [ 29% off ]
Wood Cement Extra Fast 5/8 oz
$1.89 [ 22% off ]
Plastic Cement Tube 5/8 oz
$1.69 [ 19% off ]
D12-5 Model Rocket Engine (3)
$11.69 [ 33% off ]
HobbyLite Filler Balsa 8 oz
$4.99 [ 28% off ]
B6-6 Model Rocket Engine (3)
$7.19 [ 33% off ]
G Force Rocket 4''
$66.59 [ 33% off ]
Bulk A8-3 Engine Educator Pack (24)
$46.09 [ 35% off ]
Bulk B6-4 Engine Educator Pack (24)
$46.79 [ 35% off ]
PNC-50 Nose Cone Style #2
$1.39 [ 30% off ]
INSTA-CURE Gap Filling Cyanoacrylate 2oz
$8.19 [ 18% off ]
Spray Black 3 oz
$4.29 [ 22% off ]
B6-2 Model Rocket Engine (3)
$7.19 [ 33% off ]
|
|
;postJson('/cgi-bin/a4.cgi','aform');)
