This is a 3.5 oz glass jar of Sanding Sealer Primer from Midwest. The original hot fuel proof butyrate dope system which gives a durable, fast-drying, lightweight and beautiful lacquer-type finish. Product Features
- Use over raw wood to seal grain. Drys clear.
- Used for Tissue Covered Aiplane Models, Control Line Airplane Models, R/C Airplane and Boat Models, Wood Scouting Projects and Model
- Rockets.
- For use on paper, fabric coverings, balsa and basswood.
- Contains no lead.
Product Specifications
- Fluid Ounce: 3.5 oz (103.5 mL)
- Fuel Proof: No, Do Not use as a final coat.
- Midwest Product Number: 71-4
What's Included One 3.5 oz Glass Jar of Sanding Sealer Primer Required
- Use in a well ventilated area with lung, eye and skin protection.
- Brush to apply Sanding Sealer to the model.
- Aero-Gloss Thinner (mid43-16) for clean-up.
|
Click a link to the left to view products here... |
Product Rankings Manufacturer Comments - Flammable: Contains toluol and methyl ethyl keytone.
- As with any type of painting procedure, always test for compatibility of materials on a scrap piece before attempting to paint model.
- For best results: 1. Sand entire model until smooth surface is obtained by using progressively coarse to fine sandpaper.
- 2. Fill in any surface irregularities with Aero-Gloss Balsa
- Fillercoat Primer.
- 3. Stir Sanding Sealer thoroughly. Apply as many coats as required
- with a full brush to obtain smooth surface. Sand between coats
- using tack rag to wipe away dust.
- 4. Dry 72 hours before paint application. Topcoat Sanding Sealer
- with Formula U or Aero-Gloss Dopes.
|
Also Viewed
Aerogloss Balsa Fillercoat 3.5 oz
$6.19 [ 22% off ]
Aerogloss Sanding Sealer 1 oz
$4.29 [ 21% off ]
(bulk of 6) Aerogloss Clear 3.5 oz
$34.74 [ 27% off ]
(bulk of 6) Aerogloss Balsa Fillercoat 1 oz
$25.74 [ 21% off ]
Aerogloss Thinner 3.5 oz
$6.19 [ 22% off ]
Aerogloss Clear 1 oz
$4.29 [ 21% off ]
Aerogloss Flat Clear 3.5 oz
$6.19 [ 22% off ]
Aerogloss Thinner 1 oz
$4.29 [ 21% off ]
Deluxe Hobby Kit
$26.99 [ 20% off ]
Model Master Masking Tape
$5.89 [ 28% off ]
Apprentice Boat Paint
$22.21 [ 25% off ]
INSTA-CURE Gap Filling Cyanoacrylate 1oz
$4.69 [ 21% off ]
Basic Hobby Kit
$6.99 [ 23% off ]
MAXI-CURE Extra Thick Cyanoacrylate 1/2oz
$3.19 [ 20% off ]
Electron Beam Launcher
$13.29 [ 33% off ]
Intermediate Hobby Kit
$13.99 [ 26% off ]
Wood Cement Extra Fast 5/8 oz
$1.89 [ 22% off ]
Plastic Cement Tube 5/8 oz
$1.69 [ 19% off ]
Model Master Hobby Knife
$5.49 [ 28% off ]
E Model Rocket Launch Controller
$18.29 [ 33% off ]
|
|
Also Bought
Aerogloss Balsa Fillercoat 3.5 oz
$6.19 [ 22% off ]
Aerogloss Thinner 3.5 oz
$6.19 [ 22% off ]
(bulk of 6) Aerogloss Clear 3.5 oz
$34.74 [ 27% off ]
Aerogloss Thinner 1 oz
$4.29 [ 21% off ]
E9-6 Model Rocket Engine (3)
$15.99 [ 33% off ]
Sandpaper
$2.29 [ 32% off ]
G40-7W White Lightning Motor
$17.99 [ 33% off ]
C6-0 Model Rocket Engine (3)
$7.89 [ 33% off ]
MAXI-CURE Extra Thick Cyanoacrylate 1/2oz
$3.19 [ 20% off ]
INSTA-CURE Gap Filling Cyanoacrylate 1oz
$4.69 [ 21% off ]
MMA-2 Motor Adapter for 38-29mm
$4.69 [ 10% off ]
SUMO 4'' Rocket Kit
$79.89 [ 33% off ]
E9-4 Model Rocket Engine (3)
$15.99 [ 33% off ]
Battery Pack for 750 Mini
$18.54 [ 25% off ]
Masking Tape Refill 10mm
$2.29 [ 28% off ]
Masking Tape 18mm
$5.55 [ 26% off ]
Spray Copper 3 oz
$4.29 [ 22% off ]
Bending Pliers For Photo Etched Parts
$23.99 [ 29% off ]
Navaho AGM Kit
$12.69 [ 33% off ]
Recovery Wadding
$3.49 [ 36% off ]
|
|
;postJson('/cgi-bin/a4.cgi','aform');)
