• Independently powers the front or rear motors in a dual-moto crawler, applicable for dual brushed motor or single brushe motor applications.
• Compatible with any Super Crawler dual-system rig, such as EnRoute' Berg, Team Integy's Super and Unlimited class of crawlers an Clod Buster based vehicles.
• Five adjustable parameters; Drag Brake, Dead Band, Minimum Drive Drive Frequency and Battery Selection (LiPo LiFe and NiMH).
• Can be adjusted and fine tuned via Novak's PC interface, the Novalin (NOVM5440)-not included.
• Compatible with dual-brushed motor or single-brushed moto applications.
• Universal JST Input Plug fits all popular brand receivers.
• Water-resistant case with gasket seal.
• 120 day limited warranty through Novak.

• Input Voltage: 2-3S LiPo/LiFe cells or 4-9 NiMH cells (1.2V/cell)
• On-Resistance (dual motor): 0.0016 ohm at 25° C trans temp
• On-Resistance (single motor): 0.0008 ohm at 25° C trans temp
• Size: 1.16 x 1.47" (29.5 x 37.3mm)
• Weight (w/o wires): 1.30oz (36.9g)
• Motor Limit: 27-turn (2S), 33-turn (3S) 540-sized dual brushed motors
• BEC: 6.0 volts DC/5.0 amps
• Status LEDs: 4 on-board; 2 external
• Voltage Cut-Off: 6.25V (2S LiPo), 4.75V (2S LiFe), 9.75V (3S LiPo)
• 7.125V (3S LiFe) (when LiPoly cut-off circuitry is enabled)
• Power Wires: 14G super-flex copper-strand silicone wire

Novak M2 Dig 3S Electronic Speed Control with receiver plug, power wires and instruction sheet