_ This is the O.S. Max .18CV-RX Side Exhaust Engine with 11J rotary carburetor and pull starter.:
Good for all ready-to-run 1/10 scale cars & trucks that require a pull-start power plant. Especially suited for off-road trucks.:
Fits Kyosho Inferno TR-15 Stadium Force3, DuraTrax Evaders, Tamiya Terra Crusher and HPI Nitro RS4 3 Series.:
Product Features
- Larger displacement and more power in a .15 size crankcase.:
- Rotary carburetor with two screwdriver-adjustable needles, mixtur control screw, 360° fuel inlet, and big 6.5mm bore for more torque.:
- True ABC construction with CAD designed 3-port liner.:
- Machined, aluminum piston boosts performance and enhances durability.:
- Standard ball bearing suppported crankshaft with enlarged fuel port for smoother air and fuel flow.:
- Larger, thicker rear bearing handles racing loads with ease.:
- High volume #203 air filter assembly with two pre-oiled foam elements.:
- Two year warranty.:
Product Specifications
- Bore: 0.63 (16.0mm):
- Stroke: 0.59 (15.0mm):
- Displacement: .18 cu in (3.0cc):
- Practical RPM: 3000-32,000:
- Power Output: 1.35 PS, 1.33 HP/28,000 RPM:
- Weight: 10.4oz (295.5g):
- Width between mounting holes same side: 0.4 (11mm):
- Width between mounting holes opposite side: 1.2 (31.4mm):
- Crankcase width: 1.6 (40mm):
- Distance from starter to drive hub: 2.9 (74.8mm):
- Distance from starter to end of crankshaft: 3.4 (87.8mm):
- Distance from center of crankcase to drive hub: 1.6 (41mm):
- Height/bottom of crankcase to top of cylinder head: 4 (100.9mm):
- Height/center of crankshaft to top of cyinder head: 3.2 (80.9mm):
What's Included One O.S. Max .18CV-RX engine with, 11J carb, pull starter, #8 glow plug, air filter assembly with two elements, mounting spacers, four 3 x 14mm phillips head screws, instruction manual
Required
- Glow fuel for vehicles with 5%-30% nitromethane and no less than 18% lubricant content
- Most of the fuels we carry meet or exceed the lubricant content required for optimum performance and maximum engine life. In the past, the conventional lubricant content used in fuel was 18%. But with new advanced technologies, fuels like Red Alert and O'Donnell for example, have a better quality of lubricants even though the percentages of lubricant content are lower. These high-tech lubricants provide exceptional cooling and protection.
- Fuel filter:
- Medium fuel tubing:
|
Click a link to the left to view products here... |
Product Rankings Manufacturer Comments Needle Settings: High Speed: 2.5 turns out from fully closed Metering Needle (low speed): .5 turn in from flush with carb body Throttle Stop Screw: 1mm open from fully closed:
|
Customer Reviews
5.0 Stars (1 ratings)
or
One-Click-Rating
Also Viewed
.21XZ-B ABC w/21J2 Carb
$269.99 [ 40% off ]
Nitro Star T3.0 Engine
$77.59 [ 41% off ]
LRP ZR.30 Spec.2 Pull Start
$188.99 [ 37% off ]
Nitro Star T-15 PS Engine
$68.29 [ 40% off ]
TRX 3.3 IPS Shaft w/Recoil
$131.69 [ 40% off ]
TRX 2.5R Racing Engine w/PS
$101.79 [ 40% off ]
Hi-Flier Model Rocket Kit
$6.39 [ 32% off ]
.18CV-RX ABC 11G Slide Carb
$149.99 [ 46% off ]
DLE-20cc Gas Engine w/EI & Muffler
$249.99 [ 10% off ]
Nitro Star F4.1 w/Pullstart
$146.79 [ 37% off ]
1/108 Harbour Tug Boat
$12.89 [ 29% off ]
Engine Multi-Shaft Recoil Start
$107.19 [ 36% off ]
.46LA Non-Ring 40D Carb E3030 Muffler
$84.98 [ 34% off ]
PRO .28BD-R Engine
$169.98 [ 43% off ]
.15X PS SG Crankshaft On-Road
$91.99 [ 36% off ]
.18CV-RX(S) ABC 11J Roto Carb
$149.99 [ 46% off ]
Dual Crossing Gate - Power-Loc(TM) - HO-Scale
$18.88 [ 24% off ]
US Army Patriot M-104 Model Rocket Kit
$11.59 [ 32% off ]
Pinewood Derby Adjustable Stick-On Weights 2 oz
$2.69 [ 32% off ]
Diamond Plate 1/16 (2)
$9.79 [ 29% off ]
|
|
|
|
;postJson('/cgi-bin/a4.cgi','aform');)
