• DLC coated crankshaft with silicone filled intake passage fo improved fuel flow.:
• ABC piston and liner construction Aluminum piston fitted to Brass cylinder liner that is Chrome plated.:
• 21J2(B) slide valve carburetor with 6mm carb reducer that restrict airflow helping to increase the amount of torque produced.:
• Black anodized crankcase.:
• Ceramic rear ball bearing.:

• Displacement: .19 cu in (3.1cc):
• Output: 2.3 PS, 2.27 HP/34,000RPM:
• Practical RPM Range: 4,000 - 40,000:
• Bore: 0.62 (15.8mm):
• Stroke: 0.62 (15.8mm):
• Weight: 12.10oz (343g):
• Distance Between Mounting Holes Same Side: 0.83 (21mm):
• Distance Between Mounting Holes Opposite Side: 1.45 (37mm):
• Height Bottom of Mounting Tabs/Top of Cylinder Head: 3.4 (86.2mm):
• Width of Mounting Tabs: 1.8 (45mm):
• Distance from Backplate to Front Bearing: 2.5 (64.5mm):
• Distance from Center of Crankshaft to Front Bearing: 1.7 (44mm):
• Distance from Center of Crankshaft to Backplate: 0.81 (20.5mm):

19XZ-B ABC Buggy Engine with Slide Valve Carb, P3 Turbo Glow Plug, Exhaust Seal Ring, two Dust Caps, Instruction Manual and 6mm Carb Reducer

Carburetor Settings, NOTE carburetor is preset at factory and requires very small adjustments Needle Valve: Approximately 3.5 turns open from fully closed Throttle: Approximately 0.5mm open from factory setting with reducer removed Metering Needle: Rotate until slotted head is 1.5mm away from ball link body Mixture Control Valve: Rotate until slotted head is flush with carb body: