Hobbylinc Home
Search:
Help Hobbylinc.com Home Page Shopping Cart
1/48 Hyakushiki Shitei
Other items from Tamiya

The Mitsubishi Hyakushiki Shiteir is supposed to be one of the best Japanese aircraft. Developed as a high-altitude, high-speed reconnaissance aircraft, it proved very successful and was used throughout the pacific war by the Japanese Army. Shortly before China-based B-29s initiated high-altitude daylight raids over Japan, it became ovcious to the Japanese Army leaders that an urgent development of an interceptor fighter with good performances at high altitude was necessary. In June 1943, the Army Aeronautical Research Institute studied the possibility of adapting the Hyakushiki Shiteir, which was one of the few operational aircraft in the Japanese Army to have the required altitude performance, to this type of operation. In May 1944, the project was approved and urgently carried out. To mount two 20mm machine guns on the nose, the forward fuselage fuel tank were replaced and nose canopy was modified to "stepped" nose housing. The aircraft with these modifications were called Hyakushiki Shitei III Kai Air Defence Fighter "Otsu" type. Further, in July 1944, the Army ordered to add a 37mm dorsal canon tofire forward and upward at an angle of 70 degrees. Aircraft with this addition was called "Otsu + Hei" type. Although most of them were flown by reconnaissance aircraft pilots with few dog figh experience, they made greater military gains against B29s proving the outstanding basic capability of the Hyakushiki Shitei.

Your Price:$28.19
Savings:27% off
List Price:$39.00
Product Number:tam61056
In Stock
In Stock
OR
Add to Wish List
Features
  • Twin radial engine, two seat air defense fighter.
  • Markings included for 3 Imperial Japanese Army aircraft.
  • Cockpit detail: raised instrument panel detail, control stick, seat, bulkheads, observer's equipment, fuselage ribs and stringers.
  • Wing has center section spar to add strength to the assembly.
  • Twin Ha-112-II engines, top speed 390mph at 20,000ft, highly streamlined fuselage, 37mm dorsal cannon elevated at 70 degrees.
Specifications
  • Scale: 1/48
  • Wingspan: 9" (22.9cm)
  • Fuselage Length: 12" (30.6cm)
Markings
  • Decal options:
  • Single sheet of InvisaClear decals contains aircraft code letters,
  • serial numbers, national insignia, stencils, and cockpit
  • instruments Invisa-Clear decals by Superscale are made using a
  • special process which ensures that a minimum amount of clear film
  • surrounds the coloured part of the decal. Three aircraft:
  • -1: 17th Dokuritsu Hikotai.
  • -2: 16th Dokuritsu Hikotai.
  • -3: 28th Hiko Sentai.
  • All Aircraft- Top Surfaces: IJA Dark Green.
  • Bottom Surfaces: IJA Light Grey.
Others Also Ordered
Requires
  • Assembly
  • Modeling Knife (tes50627c)
  • Paint: (X1 - Black), (X10 - Gun Metal), (X11 - Chrome Silver), (X18 - Semi Gloss Black), (X4 - Blue), (X7 - Red), (XF1 - Flat Black),
  • (XF10 - Flat Brown), (XF12 - J.N. Grey), (XF13 - J.A. Green), (XF15 - Flat Flesh), (XF16 - Flat Aluminum), (XF19 - Sky Grey), (XF2 - Flat White), (XF21 - Sky), (XF3 - Flat Yellow)
  • Paint Brushes
  • Sandpaper (tes8802)
  • Liquid Plastic Cement (tes3502)
  • White Glue (hcahcay8500)
  • CA (hlc107) or Tube Type (thick) Plastic Cement (tes3501)
  • Optional tools: Needle File Set, Sprue Cutter, Airbrush and
  • Accessories
Click a link to the left to view products here...
Home      |      Help      |      Order Status      |      Site Map
Copyright ©1995-2009 HobbyLinc. All rights reserved. Images and Descriptions are representative only, actual items may vary. Prices subject to change without notice.
index