This is the 1/10 scale electric powered, radio controlled, Tamiya DB01 R Buggy Chassis Kit. Product Features
- Chassis: DB01R plastic chassis with integrated bulkheads fo simplified maintenance, chassis also locates heavy components nea the center for optimum weight distribution.
- Drive: Four wheel two belt drive, tension adjustable, enclosed wit ABS resin covers to protect from dirt.
- Ball Bearings: Full set included.
- Shocks: High performance aeration oil filled provide progressiv damping effect for smooth movement over small bumps an absorption of heavy shocks from rough terrain.
- Gearboxes: Enclosed, front and rear.
- Differentials: Ball type.
- Transmission: Single speed.
- Motor Mount: Aluminum diecast and aluminum heatsink.
- Suspension: Four wheel independent double wishbone with high-tractio arms, aluminum mounts, same configuration as the Tamiya TRF501 chassis.
- Caster: Adjustable, caster/toe-in refers to the angle of the fron suspension when viewed from the side of the car in relation to th chassis.
- Camber: Adjustable, camber refers to the angle of the tops of th tires from vertical when viewed from front or behind vehicle.
- Steering: Bell-crank with servo saver.
Product Specifications
- VEHICLE-
- Length: 15.5" (395mm)
- Width: 9.8" (248mm)
- Height: 6.2" (157mm)
- Weight: 2.4lbs (1075g)
- BODY-
- Length: 11.25" (287mm)
- Width: 6.12" (150mm)
- Height: 3.0" (72mm)
What's Included
- DB01 R rolling chassis with oil filled aeration shocks, shock oil
- 91 tooth spur gear, decal sheet and instructions
Required
- Radio: 2-channel with 1 standard servo and electronic speed control
- Radio Batteries: 8 AA size
- Motor: 540 size
- Pinion Gear: 16-23T 48P depending on motor and track conditions
- Battery: 6-cell flat pack with standard connector
- Charger: AC/DC Timed or Peak for 6-cell battery
- Tires
- Rear: 1.6" (41mm) wide, 3.3" (83mm) outer diameter
- Front: 1.2" (32mm) wide, 3.3" (83mm) outer diameter
- Inner Diameter 2.2" (56mm)
- Wheels: One-piece dish type
- Paint: Spray or brush-on for polycarbonate body
- Misc. Items: Building and track equipment
|
Click a link to the left to view products here... |
Manufacturer Comments - For Replacement Ball Bearings use Qty. Size Locatio Qty Bearing Se 2 10 x 15mm Front Ball Diff.
- 2 DTXC159 2 10 x 15mm Rear Ball Dif 1 DTXC159 2 5 x 8mm Front Ball Diff.
- 2 DTXC152 2 5 x 8mm Rear Ball Dif 2 DTXC152 2 4 x 8mm Center Pulle 1 DTXC151 2 5 x 10mm Front Axle 1 DTXC153 2 5 x 10mm Rear Axle 1 DTXC153 4 5 x 8mm Steering Arm 2 DTXC1523.
|
Customer Reviews
4.0 Stars (2 ratings)
or
One-Click-Rating
Also Viewed
1/10 TA06 PRO Chassis Kit
$283.59 [ 36% off ]
1/10 TB-03 VDS Drift Spec Chassis Kit
$425.79 [ 41% off ]
1/24-1/25 Wired Distributor Standard Kit Black
$4.74 [ 20% off ]
1/24-1/25 Custom Foot Pedals (26pc)
$3.17 [ 20% off ]
1/10 FF-03 Pro Chassis Kit
$212.99 [ 36% off ]
1/24-1/25 Street Rod Mirrors
$3.95 [ 20% off ]
1/10 TT-01R Type-E Chassis Kit
$155.69 [ 36% off ]
1/24-1/25 Compression Fitting #6 (8pc)
$7.92 [ 20% off ]
1/24 '86 Monte Carlo 2 'n 1
$16.89 [ 29% off ]
Subaru BRZ TT-01E 4WD On-Road Kit
$130.49 [ 36% off ]
1/10 4x4 Off Road '73 Bronco Kit
$405.09 [ 37% off ]
1/25 '03 Jeep Rubicon
$16.89 [ 29% off ]
BMW M3 Sport Evo Jagermeister TT01E 4WD OnRd
$130.49 [ 36% off ]
Intimidator SE Pro Complete Kit
$396.99 [ 24% off ]
1/10 Mitsubishi Lancer Evo V WRC
$224.29 [ 36% off ]
Wraith 4WD Kit
$310.98 [ 45% off ]
XV-01 Pro Chassis Kit
$291.69 [ 37% off ]
1/24 GT Tuning Parts
$11.38 [ 25% off ]
1/10 Wraith 4WD Rock Racer RTR
$399.99 [ 46% off ]
1/24-1/25 Wiper Blades 15'' (10pc)
$3.17 [ 20% off ]
|
|
|
|
