This is the Tekin 1/8 RX8 Brushless System with 4038 Brushless 1700kV Motor for use in 1/8 Truggies. Product Features
- T8 1700kV Brushless Motor:.
- CNC Machined 6061 T6 Billet aluminum Ribbed Heatsink Can.
- Sensored and Sensorless operation.
- High Current Solder Tabs.
- Rebuildable Design.
- Neodymium Sintered Magnet.
- Precision Engineered for Maximum Energy Conversion.
- Dual-Plug Sensor Wire Harness.
- RX8 ESC:.
- Easily Access Programming, Anywhere, Anytime.
- Drives Sensor/Sensorless Brushless and Brushed Motors.
- D2: Dual Drive Mode Technology.
- On-Board Temperature Indicator.
- PC Interface for Custom Programming.
- HDAC: High Density Copper Fet Boards.
- Sensor Plug for Precise Commutation with all Motors.
- Solder Posts for Easy Wire Replacement.
- Self Test Diagnostics and Factory Reset.
- RS-232 Digital Communications Protocol.
- Pit Tune Mode.
- DGF2: Digital Glitch Filtering V2.
Product Specifications
- Motor
- Weight: 11.5oz(341g)
- Shaft Dimensions: 19mm x 5mm w/flat
- Motor Diameter: 1.57"(40mm)/1.65"(42mm) including fin
- Motor Length: 2.80"(71mm)
- ESC
- Controls: Forward/Brake/Reverse
- Input Voltage: up to 6S Lipo
- Continuous Current: 210 Amps
- BEC: 6.0V/5.0A
- Motor Limit Brushless Mode: No Limit
- Motor Limit Brushed Fwd Only Mode: No Limit
- Motor Limit Brushed Fwd/Rev Mode: No Limit
- Throttle Profiles: 7 choices (on board)
- Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
- Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
- Dimensions: 1.5" x 2.2" x 1.4"
- Weight Approx: 2.7oz (76.5g)
What's Included
- One T8 1700kV Brushless Motor
- One RX8 Sensored/Sendorless ESC
- One Cooling Fan and Mounting Hardware
- Zip Ties
- Bare Motor Wires
- Tekin Decals
Required
- Installation in the vehicle
|
Click a link to the left to view products here... |
Product Rankings
|
|
;postJson('/cgi-bin/a4.cgi','aform');)
