BLUE METAL FLAKE 3 @ 5.55

This is a 3 oz. (85 g) can of Sapphire Blue Metal Flake Enamel Spray Paint.

Testors BLUE METAL FLAKE 3 @ 5.55
 (3)
 Testors # tes1639
$5.19
 
Retail $6.59  SAVE 21% !
Testors Item # tes1639
Specifications :
  • Testors Product Number: 1639
Out of Stock
USA Ground Shipping Only
Website security verified by GoDaddy.

Spotlight Review

 
"Great product"
no.1silverback
I used this with a silver base coat and it really looked good. Laid niceley, no running away from edges or corners. Didn't really need to be polished but I did anyway.

Member Gallery

(Pictures shared by our community)

You Might Also Like

← Swipe To View More →

Features

  • Made of enamel and is flammable and toxic.
  • Can be used for
  • models, ceramic, plastics, leather, stone, metal, styrofoam,
  • crafts, wax, glass, paper, figures, fabric, wood and touching
  • up purposes.
  • Not suitable for polyethylene or vinyl.
  • Contains no lead or harmful CFC'S.
  • Easy-to-hold can.
  • Does not exceed 80% VOC by weight.

Specs

  • Testors Product Number: 1639

Includes

  • One 3 oz. (85 g) Can of Sapphire Blue Metal Flake Enamel
  • Spray Paint.

Requirements & Suggestions

Eye, Lung and Skin protection.

← Swipe To View More →


Reviews

  
 
"Beautiful blue."
sagtbone
I used this particular color on my AMT '68 Shelby Mustang model kit. The results were just fantastic. No runs, drips or errors. The paint went on smoothly. The sheen was great and even better after a coat of gloss. I was so happy with this paint, I searched for it until I found one here at hobbylinc and ordered immediately.

Comments

  • Keep out of reach of children.
  • Highly Flammable Paint, avoid heat, flame or puncturing can.
  • Avoid eye contact, skin contact or prolonged breathing of vapors, best to use in a well-ventilated area.
  • Inhaling contents is harmful to respiratory tract and nervous system.
  • Product has chemical known to cause birth defects and other reproductive harm in the state of California.
  • Shake can vigorously before using, reshake often and use at room temperature.
  • For best desired results, test product first.
  • Spray with even strokes and do not stop painting in the middle, for the best results.
  • To avoid wrinkling, recoat within 3 hours or after 48 hours.
  • To clear valve after use, invert can and spray several seconds, if nozzle clogs, clean with thinner.

Others Also Ordererd

← Swipe To View More →