 |
Detail Thinner 4 oz |
  
|
|
Detail Thinner 4 oz |
|
Description This is a 4 oz (118mL) Plastic Bottle of Thinner used for Thinning Acrylic Model Master Acryl Paints.
Features Used specifically for thinning Model Master Acryl Paints.
Red plastic cap and stopper for storage purposes. Small hole in the tip of bottle for drop-by-drop application. Includes One 4 oz (118mL) Plastic Bottle of Thinner used for Thinning
Acrylic Model Master Acryl Paints Related Items
|
Product Information
Requires Eye protection.
Removing red stopper and cap from bottle before use. Comments Keep out of reach of children.
Contains Propylene Glycol In case of eye contact, flush eye immediately and seek medical help. Avoid prolonged skin contact. For Brushing: Model Master Acryl should not need thinning for brush applications. If thinning is required, add slowly - drop by drop - to achieve desired viscosity. Try to thin only the amount of paint needed for one session. For Airbrushing: Most Model Master Acryl colors will airbrush without thinning. The exception is the Figure Colors which have been specifically formulated with a higher viscosity. A thinning ratio of 4 parts paint to 1 part thinner is suggested for Figure Colors. If more thinner is needed, add slowly - drop by drop. A rule of thumb is to "thin to consistency of milk". Fine line detail air- brushing requires practice and varies greatly with the equipment and air pressure being used. Experiment on a scrap before painting finished model. Others Also Ordered
|
