LustreKote model paint is a high gloss, fuelproof paint specially formulate to match Top Flite MonoKote covering.

Can be used on balsa, plywood, fiberglass, aluminum, ABS plastic, butyrate and MonoKote.
Tough, lightweight and fuelproof (up to 15% raw nitro, any spent fuel), stands up to years of nitro and gasoline exposure.
Acrylic Lacquer based formula offers the same high-gloss shine as MonoKote covering.

One 10oz can of Orange spray paint.

Manufacturer:	Top Flite
Product #:	top7202
Your Price:	$6.59
List Price:	$7.99
Availability:	Discontinued - No Longer Available for Purchase

LUSTREKOTE IS NOT SAFE FOR FOAM
LUSTREKOTE IS NOT COMPATIBLE WITH ANY OTHER PAINT!!!
In order for a true match to Monokote, LustreKote primer (TOPR7801) must be used as a base under the LustreKote paint (except when used on MonoKote).
LustreKote MAY be used on butyrate, but ONLY in VERY, VERY thin layers. Applying LustreKote too heavily will cause the butytrate (canopies, etc.)
to deform. Also, the combination of masking liquid (like Hobbico Master
Mask) and LustreKote (ANY amount) will damage butyrate! For best results,
mask off butyrate with LustreKote Masking Tape toptopr8018.
The matching MonoKote covering is TOPQ0202.
The matching EconoKote covering is TOPQ2602.
The matching MonoKote trim sheet is TOPQ4102.
When applying over monokote, lightly sand off shine with a 320-400 grit sandpaper, clean surface with alcohol and allow to dry.
Apply in thin coats.