LiPo 3S 11.1V 4500mAh 50C Deans
This is the Trinity Ti-22 2S 7.4V 5500mAh 50C LiPo Battery.
![Trinity LiPo 3S 11.1V 4500mAh 50C Deans](javascript:h17.showPopupImage("//web4.hobbylinc.com/gr/tri/tritep2104.jpg","ItemMain"))
Trinity # tritep2104
$69.59
| Retail $109.99 SAVE 37% ! | |
Out of Stock Discontinued - No longer available for purchase |
Website security verified by GoDaddy.
You Might Also Like
← Swipe To View More →
Features
- ROAR approved.
- Hard plastic case.
Specs
- Dimensions: 1.8 x 0.98 x 5.4" (47 x 25 x 138mm)
- Weight: 10.4oz (295g)
- Continuous Discharge Rate: 50C
- Peak Rating: 90C
Includes
- Trinity Ti-22 2S 7.4V 5500mAh 50C LiPo Battery with 12AWG Leads,
- Deans Female Connector and JST Balancing Plug
Requirements & Suggestions
- Compatible LiPo charger with Balancing Capabilities such as the Duratrax Onyx 235, DTXP4235
- Charge Lead with Banana Plugs and Dean's Male Connector DTXC2221 if using charger listed above
← Swipe To View More →
Reviews |
Comments
- The label on this battery says 90C. That refers to the peak (burst rating. The continuous discharge rate is 50C.
- ALWAYS use a LiPo-approved Charger.
- ALWAYS use a LiPo Cell Balancer.
- NEVER Charge over 4.20V per cell.
- NEVER Charge at currents greater than 1C.
- NEVER Charge through the "To ESC or "DISCHARGE" lead.
- NEVER Trickle Charge.
- NEVER allow to Discharge below 2.5V per cell.
- NEVER disassemble or modify pack wiring in any way or puncture cells.
- NEVER place on combustible materials or leave unattended durin charging.
- ALWAYS Charge in a fireproof location.
- ALWAYS set charger's output volts to match battery volts.