1/18 Blade RTR

This is the 1/18 scale electric powered, radio controlled, ready to run Trinity Blade Mini Truck.

Chassis: Plastic tub 0. 08" (2mm) thick Drive: 4 wheel aluminum shaft drive Motor: 280 size Trinity Micro Monster, TRIC1199 with aluminum motor mount Radio: Two channel AM pistol grip with separate receiver and speed control, steering and throttle trims and reverse, transmitter has charge jack Speed Control: Trinity B1006 electronic with reverse and brake Battery: 1200mAh, 6-cell side by side cell configuration with white 2-pin female connector Battery Charger: 120V wall type with 2-pin male adapter Shocks: Four aluminum bodied, oil filled Body: Super slammed racing type trimmed and painted Differentials: Ball type Tires: 1. 2" (31mm) wide, 2. 3" (58mm) diameter pin spike Wheels 1. 10" (28mm) wide, 1. 30" (33mm) white plastic dish type Suspension: Beefed up suspension arms Gearboxes: Enclosed Ball Bearings: Full set Bumpers: Front and rear plastic Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle.

1/18 scale electric powered Trinity Blade Mini Truck with AM pistol grip radio, micro steering servo, esc, AC charger, 6-cell battery body, photo-illustrated instruction manual

Manufacturer:	Trinity
Product #:	tritri90010
Your Price:	$198.69
List Price:	$275.00
Availability:	Discontinued - No Longer Available for Purchase

VEHICLE-
Length: 9.8" (249mm)
Width: 7.1" (180mm)
Height: 3.5" (88.9mm)
Weight: 17.8 oz (505 g) approx.
Wheelbase: 6.59" (167mm)
Front and Rear Tread: 5.9" (150mm) side to side at wheel centers
Front and Rear Track: 7.1" (180mm) side to side at outer wheel edges
Ground Clearance: 0.5" (13mm)
BODY
Length: 10" (254mm) including rear wing
Width: 3.7" (95mm) at rear wheels (widest point)
3" (76mm) behind from wheels (thinnest point)
Height: 2.9" (74mm)

Eight AA batteries for transmitter, SANP3501

For Replacement Ball Bearings use: Qty.
Size Location Qty.
Bearing Set 4 4x8mm Front Hubs 2 DTXC1511 4 4x8mm Rear Hubs 2 DTXC1511 2 4x7mm Rear Gear Shaft 1 DTXC1507 2 4x7mm Rear Gear Shaft 1 DTXC1507 2 5x9x3mm Front Diff 1 TRIC3117 2 5x9x3mm Rear Diff 1 TRIC3117.