Product Features
- Coaling towers are an essential part of any steam-era layout. Based on an American prototype, this tower is typical of those found at smaller terminals as well as stations and junctions; similar towers were also found out on the mainline depending on the capacity of the road's tenders. Similar towers, constructed of wood, could be found on most railroads from the late 1800s well into the 1950s and a few survive on tourist and museum lines today.
- You can create a complete steam-era servicing facility with this kit and the Modern Roundhouse (#933-3260), which can be expanded up to a full-circle with additional Add-on Stalls (#933-3261); Machine Shop (#933-3264), Sanding Tower and Drying House (#933-3813), Cinder Conveyor (#933-3816), assembled 130' Turntable (#933-2613), and assembled Steel Water Tank (#933-2601).
Product Specifications
- Walthers Product Number: 933-3823
- Walthers Catalog: 2013 N&Z, page 185
Product Rankings Product Tags
|
Also Viewed
Modern Coaling Tower -- Kit - 5 x 5-1/4 x 7-1/4'' 12.7 x 13.3 x 18.4cm - N-Scale
$38.98 [ 22% off ]
Coaling Station Built-Up N
$11.39 [ 33% off ]
Glacier Gravel Co. -- Kit - 5-5/8 x 6-5/8 x 6-1/8'' - N-Scale
$41.98 [ 16% off ]
Old Coal Mine Kit N
$21.51 [ 20% off ]
Cash Mine Works Ore House -- 4 x 4-1/2 x 5'' 10 x 11.2 x 12.5cm - N-Scale
$66.31 [ 16% off ]
Master Craftsman Series Laser-Cut Wood Kit -- Somerville Junction - Steam Engine Servcing Facility - N-Scale
$57.91 [ 16% off ]
New River Mining Company -- Kit -Main Bldg- 7-1/2 x 5-3/8 x 5-5/8'' Truck Bldg- 4-1/4 x 1-5/8 x 4-3/8'' - N-Scale
$33.58 [ 16% off ]
Mountain Lumber Co. Sawmill -- Kit - N-Scale
$51.22 [ 16% off ]
Sand and Coaling Complex -- 6-1/4 x 2-3/4 x 5-1/8'' 15.6 x 6.8 x 12.8cm - N-Scale
$20.98 [ 16% off ]
Cinder Conveyor & Ash Pit -- Kit - N-Scale
$23.50 [ 16% off ]
Sanding Tower & Drying House - Kit - N-Scale
$30.22 [ 16% off ]
Cornerstone Series(R) Shady Junction Structures Limited Run - N-Scale
$24.34 [ 16% off ]
Eagle River Mine -- Kit - 8 x 3-1/2'' 20 x 8.7cm - N-Scale
$61.27 [ 16% off ]
Long Valley Lumber Mill -- Kit - 10 x 6 x 6'' 25.4 x 15.2cm - N-Scale
$122.59 [ 16% off ]
Wicked Wanda's -- Laser-Cut Wood Kit - N-Scale
$40.27 [ 16% off ]
Cornerstone Series(R) Built-ups -- Sunrise Feed Mill 8 x 2-3/4 x 4-1/4'' 20 x 6.8 x 10.6cm - N-Scale
$41.98 [ 16% off ]
Burnt River Mining Co. -- 1-1/8 x 1-3/4'' 2.9 x 4.5cm - N-Scale
$27.04 [ 16% off ]
Weimer's Mill - Laser Art -- Kit - N-Scale
$46.31 [ 5% off ]
Truck Dump -- 2'' Long x 1'' Wide 5 x 2.5cm - N-Scale
$16.75 [ 16% off ]
Water Street Freight Terminal -- Kit - 11 x 3-1/2'' 27.5 x 8.7cm - N-Scale
$27.70 [ 16% off ]
|
|
Also Bought
Telephone Poles (12) N
$2.49 [ 28% off ]
Iron Fence Sections (8) N
$6.39 [ 28% off ]
Peel/Stick Lights 12-16V (16)
$14.09 [ 29% off ]
Weathering Pastel Set A (Sand/Lt Sand/Mud)
$8.89 [ 22% off ]
Two-Light Vertical Signal (Assembled, Painted, Prewired) - N-Scale
$21.57 [ 6% off ]
N 1954 Int'l Harvester R190 Roadway Tractor Trailer (2)
$14.36 [ 20% off ]
Pickem Up Truck N
$10.59 [ 29% off ]
(bulk of 10) Wall Board -- Natural Stone Ashlars - N-Scale
$23.50 [ 16% off ]
Signal System - Type ''G'' 3-Light Signal -- Bi-Directional Single Target - N-Scale
$41.55 [ 24% off ]
N White WC DelMonte Covered Wagon Tractor Trailer (2)
$15.96 [ 20% off ]
Mini Metals 1954 Ford F-350 Pickup Truck -- Santa Fe pkg(2) - N-Scale
$12.60 [ 16% off ]
Weathering Pastel Set B (Snow, Soot, Rust)
$8.89 [ 22% off ]
Weathering Master C Set
$8.89 [ 22% off ]
American Trucks - Chevrolet Independence Series -- Flatbed - N-Scale
$14.96 [ 6% off ]
Low Side Material Hauler Truck Body Kit -- Fits Classic Metal Works R-190 (sold separately) - N-Scale
$5.03 [ 16% off ]
Decorative Sheets -- Natural Cut Stone - N-Scale
$8.40 [ 15% off ]
Decorative Sheet Profi -- Profi Natural-Stone Masonry Wall - N-Scale
$9.23 [ 16% off ]
Brick Wall Material - N-Scale (3)
$3.17 [ 16% off ]
Farm Machinery - Modern Tractor -- Flat Red - N-Scale
$11.21 [ 6% off ]
(bulk of 10) Wall Board -- Roman Cobblestones - N-Scale
$23.50 [ 16% off ]
|
|
;postJson('/cgi-bin/a4.cgi','aform');)
