LOC Model Rockets

LOC #LOCPK16. The ADVANCED KIT SERIES is composed of nine unique models utilizing different main airframe diameters. These kits allow power usage experimentation that is available in D to G class motors. These kits offer the BEST in precision manufacturing and design concepts. LOC's exclusive pre-slotted airframe for through-the-wall fin construction or fin wedge attachment is introduced in this series. Each kit comes complete with nylon elastic shock cord, plastic nose cone, nylon chute, thick-walled airframe tubing, precision machined plywood fins and centering rings.

LOC #LOCPK48. The LOC IV is a four inch diameter, single 38 mm motor design. It boosts straight up under G motor power to altitudes reaching 1200 ft. Simple, straight forward construction and reliability rate this kit high in its class.

LOC #LOCPK52. The VULCANITE H76 is a sleek, single 38mm motor payload carrying vehicle. It was designed expressly for the VULCAN SYSTEMS H80 motor. This model can attain altitudes in access of over 3500ft. on H motor power. This kit is recommended for level 1 "H MOTOR" certification.

LOC #LOCPK72. The EXPEDITER offers sleek styling due to the use of LOC's exclusive airframe reducer. It has a single 54mm motor mount for low thrusting J class motors that can boost this model to 5000 ft.

LOC #LOCBT300. This is the Airframe Tubing 3.00 inch from LOC Precision.

LOC #LOCLP18. This is the 18 inch Nylon Parachute 8 line from LOC Precision.

LOC #LOCMMT114. This is the Motor Mount Tube 1.14 inch from LOC Precision.

LOC #LOCBT390. This is the Airframe Tubing 3.90 inch from LOC Precision.

LOC #LOCPNC300. This is a plastic nose cone for 3.00" body tubes from Loc Precision.

LOC #LOCLL25. This is the Launch Lug (6) 1/4 inch 6 inch long from LOC Precision.

LOC #LOCMMA2. This is the MMA-2 Motor Adapter for 38-29mm from LOC Precision.

LOC #LOCSC500. This is the Shock Cord Nylon 1/2 inch (Per Yard) from LOC Precision.

LOC #LOCPK1. This kit uses a single 29mm composite motor, but can be flown with a ESTES D12-3 using a MMA-1 (not included). Each kit comes complete with nylon elastic shock cord, plastic nose cone, precision machined plywood fins and centering rings, and recovery system. A special PRE-MARKED airframe for fin and launch lug attachment is included to make assembly quick and easy.

LOC #LOCPK32. The FORTE is a sleek four finned model that has a single 38mm motor mount. It performs beautifully on a variety of different F and G class motors. Impressive flights to over 1500 ft. can be reached using a G motor.

LOC #LOCPK12. This kit uses a single 29mm composite motor, but can be flown with a ESTES D12-3 using a MMA-1 (not included). Each kit comes complete with nylon elastic shock cord, plastic nose cone, precision machined plywood fins and centering rings, and recovery system. A special PRE-MARKED airframe for fin and launch lug attachment is included to make assembly quick and easy.

LOC #LOCMMA1. This is the MMA-1 Motor Adapter for 29-24mm from LOC Precision.

LOC #LOCPK8. This kit uses a single 29mm composite motor, but can be flown with a ESTES D12-3 using a MMA-1 (not included). Each kit comes complete with nylon elastic shock cord, plastic nose cone, precision machined plywood fins and centering rings, and recovery system. A special PRE-MARKED airframe for fin and launch lug attachment is included to make assembly quick and easy.

LOC #LOCSC250. This is the Shock Cord Nylon 1/4 inch (Per Yard) from LOC Precision.

LOC #LOCBT256. This is the Airframe Tubing 2.56 inch from LOC Precision.

LOC #LOCLP14. This is the 14 inch Nylon Parachute 6 line from LOC Precision.