Quick drying cement for plastic models. New $1.59 (23% off). Joins polystyrene, the plastic models are made from, to polystyrene and polystyrene to wood.

INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. New $4.99 (16% off). Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ should also be used. To prevent premature curing, don't spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. . Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications. High quality CAs such as INSTA-CURE, when used pr

Wood model glue. New $1.89 (22% off). Features: * Strong bond specially formulated for wood. * Extra Fast drying.

This is a Plastic Model Finishing Set for Cars and Trucks from Testors. New $22.99 (22% off). Features: * Includes everything you need to complete realistic model cars and trucks. * Five sanding films. * Three gluing tips. * Hobby knife. * 1 fl. oz. Clear Parts Cement & Window Maker. * 5/8 fl. oz. Cement for Plastic Models. * Three shed-proof plastic brushes. * Paint organizing tray. * Eleven 1/4 oz. jars of enamel paint in the following colors. * -Gloss Yellow. * -Gloss Orange. * -Gloss Red. * -Gloss Brown. * -Gloss Green. * -Gloss Blue. * -Gloss White. * -Gold. * -Silver. * -Gloss Gray. * -Gloss Black. * One 1/4 oz. jar of thinner.

This is a plastic nose cone for BT-50 body tubes. New $1.39 (30% off). Unique 2-piece design allows for access to the inside of the nose cone to add balancing weight if necessary.

This is the Model Master Hobby Knife from Testors. New $5.49 (28% off). Features: * Aluminum construction. * Ideal for cutting, trimming, shaping, slicing etc. * 4-Jaw chuck. * Soft-Grip Black handle for more comfortable grip. * Anti-Roll handle design.

This kits allows you to build a variety of engine mounts. New $4.99 (33% off). These mounts will fit BT-50, BT-55, BT-56 and BT-60 body tubes. It also includes parts to assemble an engine mount for "D" rockets that will allow regular engines to fit a "D" rocket. Features: With the parts in this accessory kit, you will be able to construct two regular (A, B, and C size) engine mounts. * You can build these mounts to fit BT-50, BT-55, BT-56, or BT-60 body tubes. * There are parts

A great tool from days gone by. New $14.69 (33% off). No more guessing where your balsa fins go, this guide does it all for you. Easy to follow instructions are included. No more door frames needed to draw that straight line for fin placement. Works with 3/32" (2 mm) or 1/8" (3 mm) balsa. (Body tubes and balsa not included.).

With this kit, you will be able to assemble heavy duty engine mounts for "D" and "E" engines. New $7.19 (33% off). These mounts will fit BT-55, BT-60 & BT-80 tubes. .

This is a 15" BT-80 Body Tube which is compatible with all industry BT-80 tubes. New $1.49 (57% off). Use this for building custom rockets or for repairs.

Non-toxic cement for plastic models. New $1.69 (19% off). Joins polystyrene, the plastic models are made of, to polystyrene.

This is a Testors Aircraft Finishing Enamel Paint Set. New $11.99 (22% off). Used for Finishing Models of Foreign and Domestic Aircraft. Features: * Six flat enamels and thinner, stored in a convenient organizing tray. * Paint colors are conveniently featured on the back of box packaging. * Paint contains no lead.

MAXI-CURE extra thick CA is the best CA for most plastics, including GE's Lexan MAXI-CURE is the best choice for plastic model assembly. New $3.29 (17% off). When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. . Learn about how to Select a Super Glue. Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications. High quality CAs such as INSTA-CURE, when used properly, form bonds that in many cases are stronger than the material that is being adhered. INSTA-CURE is a highly refined CA whic

This package contains 3 BT-50 body tubes made of high quality spiral wound paper.. New $5.59 (32% off).

This is a 15" BT-50 Estes-Compatible Body Tube for use in custom rockets or for repairs.. New $1.09 (31% off).

How high did it really go? Next time, measure it with this easy to use device. New $14.69 (33% off). Follow the model rocket in the sights to apogee, release the trigger to lock the reading. Easy-to-read display gives you your altitude in meters along with the elevation angle. Use two AltiTraks for greater accuracy. Great for school and science projects!

This package contains 1 white rounded nose cone. New $2.69 (37% off). The nose cone has eyelets for shock cord and shroud line attachments. This is a 1 piece nose cone that fits BT-80 body tubes.

This patented, revolutionary sanding film is bonded to tough polyester, so it won't crack when crushed or crumpled. New $2.39 (29% off). Great for the hobbyist. Features: * When clogged (clean by gripping the edges and giving it a firm snap). * Sanding film can be washed in soap and water. * Film flexes or folds to any curved surface. * Film may be wrapped around any shape sanding block for precise detailing. * ALL grades may be used wet or dry.

This is a 3" by 11.5" sheet of Hard Balsa. New $0.89 (18% off). Features: Use for cutting your own custom model rocket fin set for your model rocket, or for making replacement fins. Made of hard balsa to withstand the stress of flying rockets.

This is a BT-80 Tube Coupler by Surefire Rockets. New $0.99 (28% off). Features: * This tube coupler will allow you to join BT-80 body tubes together to create longer rockets, or in the repair of a broken body tube. * This item is also critical in building multi-staged rockets. * Useful in cutting tubes.