Features: This lighting kit includes all tubing, lampshades, wire, LEDs and instructions to fabricate eight gooseneck style exterior building lights. New $31.85 (6% off). The prototypes have been around for years and are still manufactured today. They're typically used to light entryways and signs, but could also be pole-mounted for area lighting if desired.

Features: Includes 100 feet each of red and green - the durable insulation is easily stripped as part of the tinning process.. New $4.64 (6% off).

Features: A unique blend of 62% tin, 36% lead and 2% silver alloy with a rosin flux core. New $5.65. The .020 diameter is well-suited for reaching tight spaces. Low melting point of 354-372°F 179-189°C makes it ideal for temperature-sensitive components. Includes dispenser tube.

Features: This kit includes all tubing, lampshades, wire, LEDs and instructions to build eight streetlights. New $44.80 (6% off). This curved-neck streetlight is a replica of a very basic style that has been around for more than 75 years and is still manufactured today. It can be found in towns and cities, waterfront areas, industrial areas, trackside at train stations, parks, and residential areas.

Features: This kit includes all tubing, lampshades, wire, LEDs and instructions to build eight streetlights. New $32.78 (6% off). This curved-neck streetlight is a replica of a very basic style that has been around for more than 75 years and is still manufactured today. It can be found in towns and cities, waterfront areas, industrial areas, trackside at train stations, parks, and residential areas.

Features: * Flashers automatically support all colors of 20ma LEDs with no additional resistors required. New $14.96 (6% off). Colors can be mixed on the same circuit. Will drive multiple LEDs in series depending on power supply voltage. Resistors can be added to on-board solder pads for LED brghtness control. Input: 7-16V DC Less than 1" square. LEDs sold separately. * Alternately flashes a pair of LEDs (or up to 4 pair depending on power source). Adjustable flash rate from 30 times per second to once every three seconds. On time and off time are equal (50% duty cycle).

Features: * Flashers automatically support all colors of 20ma LEDs with no additional resistors required. New $12.81 (6% off). Colors can be mixed on the same circuit. Will drive multiple LEDs in series depending on power supply voltage. Resistors can be added to on-board solder pads for LED brghtness control. Input: 7-16V DC Less than 1" square. LEDs sold separately. * Alternately flashes a pair of LEDs (or up to 4 pair depending on power source). Each light is on for 3/4 second, typical of grade crossings, school zones etc.

Features: This power supply is fully filtered and regulated to within 3% over the fll range with no load to full load. New $15.15. Its protected against accidental shorting of the outputs and includes a EMI/RFI shield on the output cable. Its ideal for prjects where highly regulated voltage is important. Includes a 6' 12V output cord.

Features: This lighting kit includes all tubing, lampshades, wire, LEDs and instructions to fabricate eight gooseneck style exterior building lights. New $36.11 (6% off). The prototypes have been around for years and are still manufactured today. They're typically used to light entryways and signs, but could also be pole-mounted for area lighting if desired.

Features: * Smaller than any decoder at just .31" x .31" x .118" and utilizing the industry's smallest microcontroller and associated voltage control circuitry, the total module consumes less than 500 µa (<1/2 ma). New $12.15 (6% off). Typical peak operating current for these modules with LED(s) attached and running through full brightness curves range from 18-38 ma. This makes them ideally suited for operation when powered directly by a function output of any of today's HO, N or Z-scale DCC decoders. Designed specifically to provide truly realistic lighting effects for 20ma LEDs, these modules include input protection against reverse polarity. Input voltage range 6-18 VDC. On-board curren

Features: This tiny switch measures just 1/4" in its longest dimension. New $2.67 (6% off). It will carry 150 ma at 12 volts and is ideal for controlling lighting in rolling stock. '.

New $8.40 (6% off).

Features: * Flashers automatically support all colors of 20ma LEDs with no additional resistors required. New $14.30 (6% off). Colors can be mixed on the same circuit. Will drive multiple LEDs in series depending on power supply voltage. Resistors can be added to on-board solder pads for LED brghtness control. Input: 7-16V DC Less than 1" square. LEDs sold separately. * Adjustable flash rate from 30 times per second to once every three seconds. On time and off time are equal (50% duty cycle).

Features: Lighting Effects Circuit for Any Scale Smaller than any decoder at just .31" x .31" x .118" and utilizing the industry's smallest microcontroller and associated voltage control circuitry, the total module consumes less than 500 µa (<1/2 ma). New $13.09 (6% off). Typical peak operating current for these modules with LED(s) attached and running through full brightness curves range from 18-38 ma. This makes them ideally suited for operation when powered directly by a function output of any of today's HO, N or Z-scale DCC decoders. Designed specifically to provide truly realistic lighting effects for 20ma LEDs, these modules include input protection against reverse polarity. Input vo

Features: Contains 51 strands of #46 wire, will carry 600 ma.. New $4.22 (6% off).

New $25.10 (6% off).

Features: This kit includes all tubing, lampshades, wire, LEDs and instructions to build eight streetlights. New $39.35 (6% off). This curved-neck streetlight is a replica of a very basic style that has been around for more than 75 years and is still manufactured today. It can be found in towns and cities, waterfront areas, industrial areas, trackside at train stations, parks, and residential areas.

Features: Design allows any color LED to be tested. New $9.33 (6% off). No need to worry about choosing the proper resistor for protect the LED. simply snap the tester n a 9V battery and start testing. Includes spring-loaded contact block to hold wired LEDs.

New $13.09 (6% off).

Features: * Smaller than any decoder at just .31" x .31" x .118" and utilizing the industry's smallest microcontroller and associated voltage control circuitry, the total module consumes less than 500 µa (. New $12.15 (6% off). * Provides a single repeating burst, increasing and decreasing in intensity to accurately represent roof beacons like those made by Prime and Federal used by most railroads.